Char-Broil COMMERCIAL 463268008 Product Manual page 19

First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner
9
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8" screws and 4mm lock washers. Press sideburner control knob onto valve stem.
Screws and Washers
removed from valve bracket
Sideburner
fascia
Valve stem
Insert sideburner burner into left shelf, making sure burner tube engages sideburner valve (A). Center stud on bottom of
10
burner fits into center hole in burner bracket on shelf. See illustration C for proper burner-to-valve engagement. Secure
burner to bracket using two #10-24x3/8" screws, 5mm lock washers, and 5mm flat washers (B).
B
5mm flat
washer
5mm lock
washer
#10-24x3/8"
screw
C
Note: Use left and right
holes on fascia to
attach valve bracket
Sideburner
valve bracket
Sideburner burner
Install bezel with "OFF" at top.
Control knob
Control knob bezel
A
Note: Use upper and lower
holes on fascia to
attach bezel
#8-32x3/8" screw
4mm
lock washer
463268008 • 19