Copper Water Tube And Joint Material Pressure Ratings - Carrier 42 SERIES Application Data

COPPER WATER TUBE AND JOINT MATERIAL PRESSURE RATINGS

A 50-50 Lead-Tin at 200 F
B 50-50 Lead-Tin at 150 F
C 50-50 Lead-Tin at 100 F
1. Not recommended for high system water pressures.
2. Standard factory joint material.
THE ABOVE CHART IS FOR REFERENCE ONLY: Check all system component pressure ratings (coils, valves, pumps, etc.)
and any applicable local or national piping codes prior to specifying system pressure rating.
JOINT MATERIALS
D
Note 1 E
F
30
95-5 Tin-Antimony at 200 F
95-5 Tin-Antimony at 150 F
95-5 Tin-Antimony at 100 F
Note 2