Recovering Your System; To Recover Your System; Recovering Pre-Installed Software And Drivers - Gateway DX4822 Quick Start & Troubleshooting Manual

R
ECOVERING YOUR SYSTEM
If the troubleshooting steps (page 34) did not help fix your problem, you can run the Gateway Recovery
Management program. This will restore your computer to the same state as when you purchased it, while giving
you an option to retain all settings and personal data for later retrieval.

To recover your system

1. Create recovery discs as soon as you can.
You can use these discs later for recovering your system from significant hardware and software problems. For
instructions, see "Creating recovery discs" on page 16.
2. Perform minor fixes.
If only one or two items of software or hardware have stopped working correctly, the problem may be solved by
reinstalling the software or the device drivers. To recover software and drivers that were pre-installed at the
factory, see "Recovering pre-installed software and drivers" on page 46. For instructions on reinstalling software
and drivers that were not pre-installed, see that product's documentation or technical support Web site.
3. Revert to a previous system condition.
If reinstalling software or drivers does not help, then the problem may be solved by returning your system to a
previous state when everything was working correctly. For instructions, see "Returning to a previous system
condition" on page 47.
4. Reset your system to its factory condition.
If nothing else has solved the problem and you want to reset your system to factory condition, see "Returning
your system to its factory condition" on page 48.

Recovering pre-installed software and drivers

As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on
your computer from the factory. You can recover using either your hard drive or the backup discs you have
created.
• New software - If you need to recover software that did not come pre-installed on your computer, you need to
follow that software's installation instructions.
• New device drivers - If you need to recover device drivers that did not come pre-installed on your computer,
follow the instructions provided with the device.
To recover your pre-installed software and drivers:
1. Click on Start > All Programs > Gateway, then click on Gateway Recovery Management. Gateway
Recovery Management opens.
- OR -
If you are recovering from your driver and application recovery disc, insert it into the disc drive, then go to Step 3
after the Gateway Application Recovery main menu opens.
2. Click on the Restore tab, then click Reinstall applications/drivers. The Gateway Application Recovery main
menu opens.
Quick Start & Troubleshooting Guide
46 -
H
ELPDESK