Garmin GPSMAP 62STC Owner's Manual page 53

Problem
How do I know my
device is in USB
mass storage mode?
My device is
connected to the
computer, but it will
not go into mass
storage mode.
I cannot see any new
removable drives in
my list of drives.
I need replacement
parts or accessories.
I want to buy an
external GPS
antenna.
GPSMAP 62 Series Owner's Manual
Solution
On the device, a screen appears showing the Garmin
logo and the USB symbol. On your computer, you should
see a new removable disk drive in My Computer on
Windows computers and a mounted volume on Mac
computers.
You may have loaded a corrupted file.
1. Disconnect the device from your computer.
2. Turn off the device.
3. Press and hold the Rocker while you connect the
device to your computer.
Continue pressing the Rocker for 10 seconds or until
the device goes into mass storage mode.
If you have several network drives mapped on your
computer, Windows may have trouble assigning drive
letters to your Garmin drives. See the Help file for your
operating system to learn how to assign drive letters.
Go to http://buy.garmin.com, or contact your Garmin
dealer.
Go to http://buy.garmin.com, or contact your Garmin
dealer.
Appendix
49