Settings; System Setup; Dog List Setup - Garmin Astro 220 Owner's Manual

S
ettInGS
S
ettInGS
Customize the operation of your Astro 220.
To access the Settings Menu:
Press MENU twice > select Advanced > Settings.

System Setup

Controls settings for GPS, WAAS, battery type, language,
external power, and proximity alarms.
• GPS—sets the unit to operate in Normal mode,
Battery Saver mode, GPS Off, or Demo Mode.
• WAAS—allows you to enable or disable Wide
Area Augmentation System.
• Battery Type—allows you to select the battery
type (alkaline, NiMH, or lithium).
• External Power Lost—causes the unit to remain
on (Stay On) or turn off (Turn Off) when external
power is removed.
• Proximity Alarms—indicates if custom points of
interest proximity alarms are on or off.

Use the System Options Menu to Restore Defaults to
return the System Setup fields to their original values,
Card Info to view micro SD card status and Mass
Storage Mode to use a microSD card as a data storage
device. Software Version shows the software version and
unit identification number. Mass Storage and Card Info
are unavailable if a microSD card is not installed.

Dog List Setup

Use the Dog List to keep track of the dogs you have
linked to your Astro 220.
Astro Dog Tracking System Owner's Manual
Dog List options allow
you to view the Dog
Info page, move the dog
on the list, or remove the
dog from the list.