Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Additional Warnings • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
24” Class TV/DVD Combo Features • 23.6” LED display • DVD player: DVD, DVD±R/RW • CD player: CD, CD-R/RW, JPEG CD • Resolution: 1920 x 1080 • Max color: 16.7 million • Brightness: 300 cd/m • Contrast: 1000 : 1 •...
COMPOSITE VIDEO INPUT 2 COMPONENT VIDEO INPUT 2 3.5mm PC AUDIO INPUT RCA STEREO AUDIO INPUT 1 COMPOSITE VIDEO INPUT 1 TV ANTENNA VIDEO INPUT 1 RF INPUT COMPONENT VIDEO INPUT 1 VGA/PC VIDEO INPUT HDMI INPUTS SOURCE POWER Press to adjust...
Page 7
Press to adjust the source. ARROW/ENTER Press to navigate DVD and system menus, and to make selections. In TV mode, press to switch to an alternate audio option when supported. ASPECT Press to adjust the aspect ratio. Press to turn closed captioning off or on.
Tighten by hand using a philips- head screw driver. 2. Insert the remaining two screws through the back of the stand and into the television. Tighten by hand using a philips-head screw driver. VIDEO INPUT 1 AC IN DRIVE TV ANTENNA...
After connecting your Set-Top Box: • Press the SOURCE button to switch between TV, AV 1 or 2, YPbPr 1 or 2, HDMI 1 or 2, and VGA to match the connection used. Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television.
Front Panel Lock is checked) Accessing the TV Menu 1. In TV mode, press the MENU button. To exit the TV menu, press the EXIT button on the remote. Setting the Clock 1. In TV mode, press the MENU button.
1. Press the SOURCE button to switch to DVD mode. 2. Insert a DVD or CD into the DISC DRIVE, label- side facing the rear of the TV. The loaded disc will begin playing automatically. 3. If the loaded disc does not automatically play, press the PLAY/PAUSE button.
Memory Card Reader Connecting a Memory Card 1. Load an SD, MS, or MMC memory card into the MEMORY CARD READER as shown in the image to the right. Accessing the Connected Memory Card 1. Follow the instructions for Connecting a Memory Card.
USB Port Connecting a USB Thumb Drive 1. Connect a USB thumb drive to the USB PORT as shown in the image to the right. Accessing the Connected USB Thumb Drive 1. Follow the instructions for Connecting a USB Thumb Drive. 2.
Press the SOURCE button to switch between • TV, AV 1 or 2, YPbPr 1 or 2, HDMI 1 or 2, and VGA to match the connection used. Connecting a Gaming Device •...
Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 Email: prodinfo@gpx.com...