Nota: Puede adquirir una fuente de alimentación para utilizar el amplificador sin baterías. En algunas tiendas de material electrónico o a través de GN Netcom, podrá encontrar un adaptador de CA de 9VDC @ 50mA. Configuración...
Page 4
Headset/handset switch [3.2] The headset/handset switch lets you revert to using your telephone’s handset instead of your headset. Select the to revert to using your telephone’s handset. Clear dial tone adjustment [3.3] Put on your headset.
Page 5
English Wearing style [4.1] Left/Right wearing of Earwrap: Align Boom arm to the side you prefer, and then insert Earwrap as illustrated. [4.2] Left/Right wearing of Headband: Align speaker to receiving cup and press into place. Removing Headband: Gently push speaker from the inside, while lifting the headband off.
Page 6
English Answering/making a call [5.1] Put on the headset. [5.2] Make sure that the headset/handset switch is set to headset position and the mute switch is not activated. [5.3] Lift the telephone’s handset and answer/dial the number. [5.4] End the call by placing the handset back on the cradle.
Page 7
English [6.1] Make a telephone call and ask the person you are calling to assist you with the following 3 steps. Transmit volume [6.2] Select the transmit volume level the person you are calling is most comfortable with by using the transmit volume adjust- ment switch at the amplifier.
• match black phono-plug (receiver) end to computer’s receiver port. Computer/telephone switch setting Your headset can be set to receive sound from your telephone, computer or from both your telephone and computer. [7.3] Telephone only: Only sound from your telephone will be transmitted to your headset.