Fully automatic coffee & espresso center (32 pages)
Summary of Contents for Jura Capresso Impressa Z5
Page 1
Impressa Z5 Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty Customer Service 1-800-220-5701...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids.
Notice: Your Impressa Z5 has a 3-prong grounded plug. To reduce the risk of electrical shock this plug will fit in an outlet only one way. If the plug does not fit in the outlet contact a qualified electrician. DO NOT modify the plug in any way.
Fig. 1 a. Measuring scoop b. Cleaning tablets c. Water hardness indicator strip d. Clearyl Water cartridge* (unpacked) Cover lid (spring loaded) Bean container safety lid (Fig. 4) Bean container Operating panel (Fig. 3) Dual coffee spout (adjustable height) Hot water spout Cup illumination (behind coffee spouts) Used coffee container Removable tray...
On/Off C O F F E E R E A D Y Milk Cappuccino Special Latte Coffee Water Lid for Grind ground selector coffee Bean container safety lid Fig. 4 Rotary Dial Rinse 1-Cup 2-Cup 1-Cup 2-Cup Espresso Coffee Fig. 3 Dual Fixed Spouts Fig.
Jura-Capresso / Address Information ...3 Illustrations...4–7 Product Warranty Registration ...10 Operating Instructions / Customer Service...10 WELCOME TO THE IMPRESSA Z5 ...10 a. "Crema Coffee" and Pressure Brewing...10 b. Different Coffee Drinks ...11 c. Coffee Facts ...11 Please Don't / Please Do ...11 Factory Settings ...12...
Page 9
Chapter Water Hardness Monitor ...21 a. Changing the Water Hardness Monitor...22 Changing Pre-Set Cup Sizes...22 25.1 1- and 2-Cup Buttons: Special Cup Button ...22 25.2 Cappuccino Button...22 25.3 Milk Button...23 25.4 Hot Water Button...23 Programming / Maintenance...23 26.1 Maintenance Programs...24 26.2 Temperature ...24 26.3 Coffee Strengths / Aroma...25 26.4 Cappuccino Programming...25...
The two-step pressure brewing system – well known in com- mercial applications – was adapted and refined by Jura coffee specialists and is the trademark of each Jura-Capresso coffee center. This Pre-Brew Aroma-System ensures optimal coffee extraction and will finish every cup with a rich layer of "crema" –...
Your Jura-Capresso automatic coffee center will always produce espresso and coffee with a thick, foamy layer called "crema." The crema traps the fine aro- matics and the light gaseous flavors that register on the palate.
• Never repair or open the machine yourself. All repairs should be performed only by an authorized service center. PLEASE, DO... • Fill water tank with fresh, cold water only. • Remove any foreign particles (small stones) from coffee beans. •...
beans (all coating and flavors contain sugar or sugar substances). Such coating can damage the burrs. Using such beans voids the warranty. Have your coffee store grind the sugar coated beans and use as described in the ground coffee funnel (chapter 20). Please note: If you like flavored coffees we recommend to add flavors to your coffee after brewing.
• Place one or two cups underneath Dual Coffee Spouts and push the desired button. The Impressa Z5 will grind, tamp and then brew the coffee. It uses a 2-step brewing process (Pre-Brew Aroma System). First, it moistens the ground coffee (pre-brew phase), pauses for a few seconds, and then starts the brewing process.
is no need to pull out the drawer unless you see the message EMPTY GROUNDS (chapter 27.4). Please note: You can always stop the brewing process by pressing the Rotary Dial or any of the eight beverage buttons. This will not affect the pre-set values. 11.
Please note: There is a gap between the Coffee Nozzle and the fixed coffee spout. (Fig. 5e) This is necessary to assure proper coffee flow. Please note: The Milk Nozzle should always be tightly connected to the Dial Component (Fig. 5e) and the venting tip needs to be clean and inserted to assure proper frothing action (Fig.
Please note: Cold milk will stay fresh up to 8 hours in the thermal milk container. Do not leave the milk sitting outside the refrigerator over night. Please note: If there is not enough milk in the milk container, the frother nozzle will dispense steam only.
Please note: When you are finished using the cappuccino feature for the day please proceed as follows: a. Remove the Thermal Milk container and place in the refrigerator. b. Remove the flexible hose on both ends and clean with hot water. c.
20. USING PRE-GROUND COFFEE You can also use pre-ground coffee, bypassing the grinder. This comes in handy if someone requests decaf coffee or a decaf cappuccino. You can also use the pre-ground funnel for ground flavored coffee. Please note: Never fill the funnel with instant coffee. Do not fill the funnel with more than two scoops.
23. CLEARYL WATER FILTER CARTRIDGE The machine comes with one Clearyl Water Filter Cartridge. The Clearyl cartridge • Reduces the water hardness up to 75%. • Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum. •...
Please note: We recommend to set the time (chapter 26.7). If you have not used 75 liters of water in three months, the filter monitor will indicate that a filter change is necessary. Important: Once the filter has lost its calcium suppressing abilities, calcium will build up inside the machine.
Please note: If your water has a high calcium content (level 5 or 6) and you use the Clearyl Filter Cartridge we recommend to decalcify the Z5 once or twice a year (chapter 26.1). 24a. CHANGING THE WATER HARDNESS MONITOR COFFEE READY •...
25.3 MILK BUTTON You can change the pre-set milk volume. • Place a cup underneath the Auto Cappuccino System. COFFEE READY • Push and hold the Milk Button until the display reads ENOUGH MILK PRESS BUTTON. • Once you have enough frothed milk in your cup push the Milk Button again.
Function Display Comment Time TIME Set actual time Auto-On UNIT ON Choose an auto-on time Auto-Off OFF AFTER Choose an auto-off time after last use Information INFORMATION Check performance and a variety of settings Renaming RENAME Rename the beverage display message buttons, the "on"...
a. Push the Rotary Dial. SELECT PRODUCT. b. Push the beverage button for which you want to change the temperature, e.g. the 1-cup Espresso Button. The display shows 1 ESPRESSO HIGH. c. Turn the Rotary Dial and select NORMAL d. Push the Rotary Dial to confirm. e.
display without using any milk COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: a. Push the Rotary Dial. The display shows b.
b. Turn the Rotary Dial until the hours are set. c. Push the Rotary Dial to confirm. The display shows MINUTES. d. Turn the Rotary Dial until the minutes are set. e. Push the Rotary Dial to confirm. Display shows and shows the actual time.
26.10 INFORMATION COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: INFORMATION. a. Push the Rotary Dial 1 ESPRESSO 15 COUNT shows how often coffee was prepared with this button. b.
• Turn the dial until the display shows: a.Push the Rotary Dial ENGLISH. b.Turn the Rotary Dial until the desired language is displayed. c.Push the Rotary Dial to confirm. d.Turn the Rotary Dial until the display shows confirm. The display will show the equivalent of Coffee Ready in the language you selected.
Important: If you pull out the drawer in between, you must empty the used coffee container. The Z5 assumes that the used coffee container will be emptied. If you do not empty the con- tainer, used coffee will overflow inside the machine and can cause serious damage to the coffee release mechanism.
29. DECALCIFYING PROCESS The machine has an integrated decalcifying program. This program takes about 50 minutes. When the display shows COFFEE READY DESCALE to decalcify the machine. You can still make coffee. However, it is highly recommended that you decalcify the machine within the next 3 to 4 days.
l. At the end of the decalcifying cycle the display shows MACHINE IS HEATING. After a few seconds the Z5 will automatically run a rinse cycle through the Dual Coffee Spouts. RINSING. TRAY / GROUNDS EMPTY Remove the containers and remove and empty the drawer and used coffee container and replace complete assembly (Fig.
Reason: The ground coffee funnel or the internal brewing chamber is clogged. Solution: Place a cup underneath the Dual Coffee Spout and run an extra rinse cycle. COFFEE READY • Push and hold the Rotary Dial until display shows FILTER. •...
Clearyl cartridge. You can order these supplies: • with the enclosed mail order form or • through our website www.capresso.com or • by calling our customer service center at 1-800-220-5701. 35. LIMITED WARRANTY Please note: This warranty will be void if the Warranty / Product...
Page 35
JURA- CAPRESSO any other liability in connection with the sale of the machine. JURA-CAPRESSO expressly disclaims liability for incidental and consequential damages caused by the machine.