Fully automatic coffee & espresso center with clearyl water care system (36 pages)
Summary of Contents for Jura Capresso Impressa S Avantgarde Series
Page 1
Impressa S Avantgarde Series Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty Customer Service 1-800-220-5701 Impressa S9 Avantgarde shown...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids.
Notice: Your Impressa S Avantgarde Series has a 3-prong grounded plug. To reduce the risk of electrical shock this plug will fit in an outlet only one way. If the plug does not fit in the outlet contact a qualified electrician. DO NOT modify the plug in any way.
FIG. 1 FIG. 1a a. Scoop b. Cleaning tablets c. Water indicator d. Clearyl filter * frothXpress-Plus System see Fig. 15 to 17a 1. Height-Adjustable Dual Coffee Spout 2. Operating Display (Fig.2) 3. Removable Water Tank 4. Low Water Flotation Device(Inside) 5.
Page 5
Steam & Hot Water System Operating Display S E L E C T FIG. 2 P R O D U C T SELECT PRODUCT Display Dialog System ON/OFF Button 1-CUP Espresso Button 1-CUP Coffee Button RINSE Button 2-CUP Espresso Button 2-CUP Coffee Button FIG.
Please note: if you lose your Operating Instructions or the Quick Reference Guide, you can download a printable copy from our website www.capresso.com. 3. WELCOME TO THE IMPRESSA S AVANTGARDE SERIES This fully automatic espresso coffee center is completely pro- grammable and extremely user friendly. With two independent stainless steel Thermoblock heating systems it can switch from brewing coffee to frothing milk without any up- or down-time.
aromatics and the light gaseous flavors that register on the palate.The high pressure and the short brewing time prevent the extraction of bitter oils and release less caffeine than any other brewing method. You will always make the absolute freshest and most aromatic cup of coffee.
• Remove any foreign particles (small stones) from coffee beans. • Let frozen beans thaw for 3 to 4 hours before pouring them into the bean container. 5. FACTORY SETTINGS Each machine leaves the factory with the settings described below. To change any of these settings (chapter 16). •...
and use as described in the ground coffee funnel (chapter 11). Please note: If you like flavored coffees we recommend to add flavors to your coffee after brewing. This way you can use your regular coffee beans in the bean container. Adding the flavors after brewing lets you control the intensity much better than with pre-flavored coffee.
• The bigger the dots, the coarser the grinding. IMPORTANT: The grinding grade can only be adjusted while the grinder is actually grinding. ATTENTION: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs. Please note: If coffee does not flow in a constant stream, turn the grinder to a coarser setting.
9b. THE A LA CARTE BUTTON The S Avantgarde has a fifth coffee button (Fig. 3A,N). With this button you can change the coffee volume and the coffee strength just before brewing. • Push the A LA CARTE button. The display shows CARTE and the strengths,e.g.
Please note: The tip of the dual frother should be attached finger tight to the rod (Fig. 14b). The top of the rod is flexible. Make sure the rod is properly seated over the steam nozzle, touching the chrome cover (Fig. 4). Tips for steaming: Leave the sleeve in the "up"...
Frothing • Place a cup underneath the frothXpress (see Fig. 15a). The machine is ready to produce steam as long as both green lights in the steam buttons are illuminated. If they are off, just push either button. Both lights will start blinking for about 15 seconds and then will stay illuminated.
For a more thorough cleaning you can take the pieces apart. When attaching the chrome sleeve to the black nipple, angle it as shown above. Use a twisting back and forth motion and gently push the two pieces together. 10g. CLEANING THE MILK CONTAINER •...
Least expensive: Decalcifying System (chapter 18.2, 18.3). Your machine is pre-set in the factory to automatically remind you to decalcify based on a water hardness of Level 2. You can change the water hardness setting to comply with the water you are using (chapter 15a).
14b. REPLACING THE CLEARYL WATER CARTRIDGE The filter is monitored automatically. After approx. 75 liters of water (~2,500 oz.) the display shows SELECT PRODUCT / CHANGE FILTER. The Rinse Button will light up. Important: Once the filter has lost its calcium suppressing abilities, calcium will build up inside the machine.
Please note: If your water has a high calcium content (level 5 or 6) and you use the Clearyl Filter Cartridge we recommend to decalcify the machine once or twice a year (chapter 18.2). 15a. CHANGING THE WATER HARDNESS MONITOR SELECT PRODUCT •...
Function Display Comment Steam Duration DRAW OFF Choose the duration for STEAM the steam portion button from 3 to 120 seconds Economy Mode ECONOMY Choose from three power saving modes Function Display Comment Actual Time TIME Set actual time Auto-On UNIT ON Choose an auto-on time Auto-Off...
• Push the Dial. The display shows SELECT • Push for example the 2-cup espresso button. Turn the dial and select 3 OZ. • Push the dial to confirm. The 3-tone melody confirms the new setting. From now on, the 2-cup espresso button will produce a total of 6 oz.
• Push and hold the Dial. FILTER • Turn the Dial until the display shows • Push the Dial. Display shows (example) • Turn the dial to change the steam time to the desired setting. • Push the dial to confirm. The 3-tone melody confirms the new setting.
16.8 AUTO-ON / UNIT ON You can set a time at which the machine turns itself on. This way you don’t have to wait for the machine to warm up. Just run one 10 second rinse cycle and you can have your first cup of coffee. Please note: Auto-on will only work if you set the actual time and the main power switch is turned on (when the small red light in the On/Off switch is illuminated, you know that the main...
• Push and hold the Dial. FILTER • Turn the Dial until the display shows • Push and turn the Dial to change the time display and push the dial to confirm. • Then turn the Dial again to change from to confirm.
coffee container onto the drawer, ground coffee will discharged onto the drawer. TRAY MISSING Insert the drawer complete with the empty used coffee container. FILL BEANS You must refill the bean container before you can brew coffee again. You can still dispense hot water or use the steam function. SELECT PRODUCT / CLEAN MACHINE After approx.
• Push the Rotary Dial and select CLEAN • Push the Rotary Dial. • Then follow the instructions in chapter 18.1. DE-SCALE MACHINE. • To access this program set the function • Then select within the function RINSE, the program DE-SCALE MACHINE.
• When the process is completed the machine turns itself off. Next time you turn the machine on the display will show FILL SYSTEM/PRESS STEAM (chapter 6c). 18. AUTOMATIC CLEANING CYCLES 18.1 CLEANING WITH SPECIAL TABLET The machine monitors how many coffees are brewed and how often the rinsing program is activated.
Clearyl Cartridge. If the cartridge is in use for several weeks install a new cartridge. Important: The decalcifying program must not be interrupted. DECALCIFYING AGENT: Only use our special decalcifying tablets Model # 61848, see chapter 21. CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.
14. Empty the container underneath the steam nozzle and place it underneath the hot water spout (Fig.1,14). 15. Turn the Selector switch to the hot water position (Fig. 3,L). The machine will now pump fresh water in intervals through the hot water spout. MACHINE DE-SCALING 16.
Page 32
Solution: Stir beans before grinding and while grinding turn the grinding selector to the coarsest setting. When using very oily beans pour the beans onto a plate and let some of the sticky oils evaporate (this will not harm the aroma of the coffee).
40lbs. Any damage in transit is NOT covered by this warranty. This warranty does not cover: • Any machine NOT distributed by JURA-CAPRESSO within the United States. • Any machine not purchased from an Authorized Dealer.
Page 34
JURA- CAPRESSO any other liability in connection with the sale of the machine. JURA-CAPRESSO expressly disclaims liability for incidental and consequential damages caused by the machine.