Download Print this page

P+L Systems EXOCUTER EX6 Manual

Advertisement

Quick Links

Commercial Zapper Insect Control
Please read these instructions carefully and store in a safe
place for future reference.
EXOCUTOR
As part of the P+L brand of insect control products, Exocutor
is an effective and flexible commercial flykiller which utilises
highly effective UV tubes. Available in a white or stainless
steel finish, four sizes of unit are available which can be wall
mounted, ceiling suspended or desk mounted.
Contents of package
- 1 x Exocutor
flykiller
- 2 x Screws, wall plugs and suspension keyrings
- 1 x Mains cable
- 2 x High powered UV tubes
or
- 1 x High powered UV tube (Exocutor 6 Only)
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
Exocutor
utilises high powered ultra violet tubes to attract
flying insects and zaps them on a triangular killing grid, before
collecting them in a deep removable catch tray.
WARNING
EXOCUTOR
MUST ONLY BE USED IN AREAS WHICH ARE FREE
OF DUST AND ANY POSSIBLE EXPLOSIVE VAPOUR MIXTURE.
SHOULD YOU HAVE ANY QUERIES CONTACT YOUR LOCAL FIRE
AUTHORITY FOR ADVICE BEFORE INSTALLATION.
EXOCUTOR
IS SUITABLE FOR INDOOR USE ONLY AND IS NOT
SUITABLE FOR USE IN BARNS, STABLES AND SIMILAR
LOCATIONS.
POSITIONING
Exocutor
should ideally be fixed around two meters above
the ground, preferably in the darkest place within the area to
be protected and is supplied with a two meter mains lead.
Do not position the unit close to windows, skylights or other
sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally, Exocutor
visible from every part of the area to be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
Exocutor
should be mounted as shown in the mounting
options section of this document. Use the removable mains
lead and plug to connect the Exocutor
appropriate rating, as specified on the specification label
found on the catch tray.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING EXOCUTOR
Exocutor
should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects
are most attracted to Exocutor
no competition from daylight or other light sources.
units should be
to a power supply of
units at night when there is
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING
It is recommended that cleaning is carried out regularly every
month. During cleaning the unit should be thoroughly wiped
down with a damp cloth, removing any build up of dirt.
Ensure the unit is completely dry before reconnecting it to the
power supply.
GUARANTEE
Exocutor
has a two year guarantee and if maintained as
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee.
*Excludes tubes and starters. Does not cover breakdown due to misuse, incorrect operation
or use in an incorrect application.
MOUNTING FIXING CENTRES
METHOD
EX6
Wall
210mm 288mm 438mm 603mm
Desk
-
Suspended
261mm 356mm 506mm 668mm
Wall
Desk
Suspended
(Chain not supplied)
EX16
EX30
EX40
-
-
-
EX6, 16, 30 & 40

Advertisement

loading

Summary of Contents for P+L Systems EXOCUTER EX6

  • Page 1 Commercial Zapper Insect Control Please read these instructions carefully and store in a safe CLEANING place for future reference. ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED FROM THE MAINS BEFORE CLEANING EXOCUTOR ™ It is recommended that cleaning is carried out regularly every As part of the P+L brand of insect control products, Exocutor ™...
  • Page 2 T005 / T006 Tray (W / S/S) T007 / T008 WEEE Compliance No. 01576542 R2 02/09 P+L Systems Ltd T +44 (0)800 988 5359 Information provided on these instructions is modified and Ten St James Business Park F +44 (0)1423 863 497 updated from time to time.

This manual is also suitable for:

Exocuter ex16Exocuter ex30Exocuter ex40