Pyle SereneLife SLFCAB10 Quick Start Manual

Security File Cabinets
Multi-Drawer Filing Cabinet with Combination Lock
Models: SLFCAB10, SLFCAB20
HOW TO SET A CUSTOM PASS CODE:
1. Adjust the pin to your current pass code (By default, the lock pin is set to "0000").
0 0 0
2. Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the
lever located on the lock from the B to A position.
A
B
3. While lever is in A position - set the desired new code. Make sure the 4 dials you set are exactly
parallel and lined up - you don't want to set to the wrong number by mistake! (Sample below).
1 3 1
4. Once your new pass code is entered, change the lever back from A to the B position.
A
B
5. Make sure to write down & remember your code! There is no way to recover it once it is set!
0
B
4
B
A
A
by