Advertisement
Quick Links
DOOR/WINDOW SENSOR Model 2GS9
1. INTRODUCTION
The sensor is designed to monitor the status of your garage door and work with the Skylink
Receiver. When the monitored garage door is opened or closed, the sensor will send signal to the
receiver and alert you the status.
In this package, you should find a sensor and mounting accessories.
Please follow the instructions below to setup the garage door sensor.
2. INSTALLATION
i)
Remove the top cover of the sensor and insert one AA battery (sold separate) to the sensor
as shown in the diagram.
ii) Press and hold the learn button in the receiver unit, release the button when the receiver
emits a beep. The zone red LED on the receiver will flash.
iii)
Tilt the sensor from vertical to horizontal to activate it.
iv)
he receiver unit will emit a long beep indicating it has learned the code from the sensor.
T
MOUNTING LOCATION
Mount the sensor near the top panel of your garage door or the appropriate location by either
double sided tape or screws.
OPERATION
The sensor will transmit the signal to the receiver when detect the door is open, the receiver will
beep / alarm and the corresponding zone LED will flash.
PRELIMINARY COPY
Advertisement
Summary of Contents for SkyLink 2GS9
- Page 1 PRELIMINARY COPY 1. INTRODUCTION The sensor is designed to monitor the status of your garage door and work with the Skylink Receiver. When the monitored garage door is opened or closed, the sensor will send signal to the receiver and alert you the status.
-
Page 2: Warranty
Proof of purchase and a Return Authorization are required. CUSTOMER SERVICE If you would like to order Skylink’s products or have difficulty getting them to work or download information and user manual, please: 1. visit our FAQ section at www.skylinkhome.com, or 2. - Page 3 DOOR/WINDOW SENSOR Model 2WA9 PRELIMINARY COPY 1. INTRODUCTION The water sensor model 2WA9 is designed to detect the water overflow, water leakage or rising water such as the water level of your bathtub. When water is detected, the receiver will alert you. It will beep and flash.
- Page 4 Proof of purchase and a Return Authorization are required. CUSTOMER SERVICE If you would like to order Skylink’s products or have difficulty getting them to work or download information and user manual, please: 1. visit our FAQ section at www.skylinkhome.com, or 2.
- Page 5 DOOR/WINDOW SENSOR Model 2WD9 PRELIMINARY COPY 1. INTRODUCTION The door/window sensor model 2WD9 is designed to monitor any door or window within your house. When the monitored window or door is opened, the sensor will send signal to the receiver and alert you the status.
- Page 6 Proof of purchase and a Return Authorization are required. CUSTOMER SERVICE If you would like to order Skylink’s products or have difficulty getting them to work or download information and user manual, please: 1. visit our FAQ section at www.skylinkhome.com, or 2.