Page of 2
Download Bookmark Comment
   
CAUTION
DR-9050C/7550C/6050C
❏ The scanner weights about 50 lbs (22.5 kg).
1.
10.
Log on to Windows with Administrator privileges.
Read the software license agreement, and
To lift or move the scanner, always use two people, one on each side. Never
click [Yes] if you consent to its conditions.
2.
Insert the Setup Disc into the computer's
attempt to lift the scanner by yourself. You could drop the scanner or pinch your
Easy Start Guide
CD-ROM drive.
fingers, resulting in personal injury or damage to the scanner. Remember to be
The setup menu automatically starts up
extra careful when moving it.
when you insert the CD-ROM into the CD-
ROM drive. If the setup menu does not start
Thank you for purchasing the Canon DR-9050C/7550C/6050C Document Scanner.
up, run the setup.exe application on the
Manuals for the Scanner
CD-ROM.
The documentation for the scanner consists of the Easy Start Guide (this manual) and the
Reference Guide (supplied with the scanner), the User Manual , and the CapturePerfect3.0
11.
Operation Guide , which are provided in electronic form and registered in the menu during
When Installing in Windows Vista
Confirm the installation destination, and
software installation.
click [Next].
When using Windows Vista, the "User
Please read this and the following manuals thoroughly before using the scanner to become
Account Control" dialog box may appear. In
Installation of CapturePerfect 3.0 starts.
acquainted with its capabilities and make the most of its many functions.
this case, enter your login user password
After reading the manuals, store them in a safe place for future reference.
for Administrator privileges, and click [OK].
❏ When lifting up the scanner, make sure you do not grasp the knob on the
Easy Start Guide (This Manual)
Document Feed Tray on the front of the scanner.
This manual describes the procedures for setting up the scanner for use.
Please follow the procedures in the Easy Start Guide to set up the scanner.
12.
Click [Finish] to complete the installation of
3.
The setup menu starts up.
Reference Guide
CapturePerfect 3.0.
This manual consists of the basic scanner operating instructions extracted
The setup menu consists of the following screens:
Next, the installation wizard for the User
from the User Manual . For more details, refer to the User Manual .
Menu Screen
Typical Installation
Manual appears.
User Manual (Electronic Manual)
This manual consists of two sections: Hardware and Software.
The Hardware section provides general information about the scanner
operational settings, maintenance, and troubleshooting.
The Software section describes how to use the ISIS/ TWAIN driver with the
scanner, and how to set up job registration tools.
13.
Click [Next].
CapturePerfect 3.0 Operation Guide (Electronic Manual)
* Installs all of the software displayed.
Installation of the User Manual starts.
This is the operation guide for CapturePerfect 3.0, the Canon document
scanner application program.
After checking the package contents, you need to install the software.
Read Manuals
Custom Installation
(
STEP 2)
IMPORTANT
The electronic manuals are PDF (Portable Document Format) files, and are installed
Installing the Software
in the following folders during software installation. (
STEP 2)
14.
Click [Finish] to complete the installation of
the User Manual.
Install the software before connecting the scanner to the computer.
* The User Manual and CapturePerfect 3.0
* Installs only the selected software.
Operation Guide electronic manuals for
the scanner are installed on the computer
CAUTION
with the rest of the software.
❏ Before installing the software, make sure your computer is correctly running one of
4.
Click [Typical Installation].
the following versions of Windows. For details on system requirements, refer to
[Typical Installation] installs the software
"Installation Requirements" on p. 2-3 of the User Manual.
User Manual
CapturePerfect 3.0 Operation Guide
(scanner driver, CapturePerfect 3.0) and the
• Windows 2000 Professional SP4 or later
User Manual. The CapturePerfect 3.0
15.
• Windows XP Home Edition SP3 or later
When all installations are complete, the
Operation Guide is installed on the
installation completed screen appears.
• Windows XP Professional SP3 or later
computer during the CapturePerfect 3.0
Checking the Package Contents
installation.
Click [Exit] to exit the installer. Click [Back]
• Windows XP Professional x64 Edition SP2 or later
to return to the menu screen.
• Windows Vista Home Basic SP1 or later (32- and 64-bit versions)
• Windows Vista Home Premium SP1 or later (32- and 64-bit versions)
When you unpack your scanner, make sure all of the following accessories are included.
5.
Click [Install].
• Windows Vista Business SP1 or later (32- and 64-bit versions)
If any of the items listed below are missing or damaged, contact your local authorized Canon
The scanner driver installation wizard
• Windows Vista Ultimate SP1 or later (32- and 64-bit versions)
dealer or service representative.
appears. This operation installs both the
• Windows Vista Enterprise SP1 or later (32- and 64-bit versions)
scanner driver and the Job Tool.
❏ Do not connect the scanner to the computer before installing the software. If you
connect the scanner and turn it ON before you install the software, a wizard screen
will appear. If this wizard appears, click [Cancel] to exit the wizard, and then turn
This completes the software installation.
the scanner OFF.
Next, you need to connect the scanner to your computer. (
STEP 3)
Windows 2000
6.
Click [Next].
DR-9050C/7550C/
Power Cord
USB Cable
6050C*
(Length: 1.5 m)
(Length: 2 m)
Easy Start Guide
Reference Guide
Setup Disc
Cleaning Cloth (1)
7.
Read the software license agreement, and
(This Guide)
Windows XP
click [Yes] if you consent to its conditions.
Installation of the scanner driver starts.
0880281099-L5T1P7-BR01
C A N O N
6 3 9 0
M I S S I S S A U G A
C A N A D A
D I X I E
R D
I N C .
O N
L 5 T
9 Z 9
Warranty Card
Registration Card
(U.S.A. and Canada only)
(U.S.A. and Canada only)
* The shape is slightly different on the DR-6050C.
8.
Click [Finish] to complete the installation.
Next, the installation wizard for
IMPORTANT
CapturePerfect 3.0 appears.
Windows Vista
The cleaning cloth is used for cleaning the scanner's interior.
Items included in this package are subject to change without notice.
Keep the package and packing materials for storing or transporting the scanner.
9.
Click [Next].
■ Trademarks
❏ Close all other applications before installing the software.
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be
trademarks or registered trademarks in other countries.
• imageFORMULA is a trademark of Canon Electronics Inc.
• Microsoft Windows
®
is a registered trademark of Microsoft USA in the United States and other countries.
• Other brands and product names used in this manual may be trademarks or registered trademarks of their
respective companies.
PUB. CE-IE-698
© CANON ELECTRONICS INC. 2009
Continued on back side

   Related Manuals for Canon DR-6050C

   Summary of Contents for Canon DR-6050C

  • Page 1

    ■ Trademarks ❏ Close all other applications before installing the software. • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of Canon Electronics Inc.

  • Page 2

    “Click here for status” balloon help. • The SCSI ID of the scanner is set to “SCSI ID = 2” by default. When using a You can click “Click here for status” to display the installation progress. daisy-chain configuration with other SCSI devices, set the DIP switches so that SCSI ID numbers are not duplicated in the system.

Comments to this Manuals

Symbols: 0
Latest comments: