Machine Storage - Bissell LITTLE GREEN 1425 User Manual

M
aintenence and care
After cleaning continued
4.
Disconnect the cleaning tool from the spray
trigger by pushing down on button lock and
pulling straight off
(DO NOT twist tools to remove them)
5.
Once removed from the spray trigger, all tools
can be cleaned by rinsing under clean running
water. The TurboBrush tool's switch must be in
"SUCTION" position before rinsing under clean
running water.
6.
Check spray nozzle for accumulated dirt or debris.
If necessary, clean with soft bristle brush.

Machine storage

1.
Wipe all surfaces with a soft cloth.
2.
Wrap power cord around the cord wrap on the
back of the Little Green PROheat .
3.
Wrap flex hose around the base of the unit and
secure the spray trigger.
4.
Store unit in protected, dry area, at room
temperature (40º to 110ºF).
w w w . b i s s e l l . c o m
Tip:
Before turning off the Little
Green, suction up clean
water to thoroughly rinse out
the interior of the flex hose.
Then, lift the cleaning tool and
point it upwards to drain any
remaining water into the dirty/
collection tank.
WARNING:
Keep spray away from face.
failure to do so may result in
personal injury.
8 0 0 . 2 3 7 . 7 6 9 1
9