Page 1
GM35950 ® MPAC 500 ATS CONTROL (FS Part No. 72-GM35950-00) • Improved power supply for increased efficiency and reduced noise. • Improved standby power supply to decrease temperatures and extend the life of the board as well as prevent loss of exercise cycle.
Page 2
List of AT commands to adjust settings on the 72-GM35950-00 Use the following AT command set to adjust parameters. The serial port must be connected using a null modem cable. No special software is required. Using your preferred serial port communication software such as Hyper Terminal, Commfront, or Hercules set your COM port to 19200 BAUD, 8 DATA, NO PARITY, 1 STOP.