Advertisement
Prepare For Your Next Garden
cleaning Instructions for your AeroGarden
Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing - Step 6). Do not use
abrasive cleaners or run through the dishwasher.
When your garden has completed its growing cycle...
1
Unplug AeroGarden.
Carefully remove Bowl and Grow
2
Surface from Base and bring to
a sink. Set Base and Lamp Hood
aside.
NEVER SUBMERSE BASE AND
CONTROL PANEL IN WATER.
3
Remove Grow Surface from Bowl
and place on a counter near a
sink.
4
Empty contents of Bowl in sink.
5
Remove Seed Pods and plants
from Grow Surface.
• Pull Seed Pods out of Grow
Surface openings.
• Throw away Seed Pods and
plant debris (plant growth and
roots). If you compost, plant
debris can be composted.
6
Sanitize AeroGarden.
• Fill Bowl ¾ full with water.
• Add ¼ cup (59ml) of chlorine
bleach.
• Let sit for 2 minutes.
• Using sanitizing water, wipe
Grow Surface and Bowl with
soft cloth or sponge.*
*Gloves recommended.
• Scrub underside of Grow
Surface with soft scrub brush to
remove any tangled roots.
• Empty bleach water from Bowl.
13
7
Rinse Bowl and Grow Surface with
tap water. Repeat.
Grow
Surface
8
Towel dry Bowl and Grow Surface
before putting them back together
and setting them on Base.
9
If Grow Bulbs have been in use
more than 6 months, they should be
replaced at this time (see page 12).
Your AeroGarden is now ready for
replanting.
Plant
Growth
Seed
Pod
Roots
Advertisement
