Usb Emodule Error Messages; Smbios Emodule Error Messages; Cpu Emodule Error Messages - Acer Aspire M5810 Service Manual

USB eModule Error Messages

Message
Displayed
Warning! This message is displayed when a non-bootable USB device is enumerated and disabled
Unsupported by the BIOS.
USB device
found and
disabled!
Warning! Port This message is displayed to indicate that port 60h/64h emulation mode cannot be enabled
60h/64h for this USB host controller. This condition occurs if USB KBC emulation option is set for
emulation is non-SMI mode.
not supported
by this USB
Host
Controller!
Warning! EHCI This message is displayed to indicate that EHCI controller is disabled because of incorrect
controller data structure. This condition occur if the USB host controller needs 64-bit data structure
disabled. It while the USB is ported with 32-bit data structure.
requires 64bit
data support in
the BIOS.

SMBIOS eModule Error Messages

Message Displayed
Not enough space in Runtime area!!. SMBIOS data
will not be available.

CPU eModule Error Messages

Message Displayed
Warning! This system board does not support the
power requirements of the installed processor. The
processor will be run at a reduced frequency, which
will impact system performance. area!!. SMBIOS
data will not be available.
MPS Table (Multi-processor) eModule Error Messages
Message Displayed
Insufficient Runtime space for MPS data! System
may operate in PIC or Non-MPS mode.
Chapter 4
Description
Description
This message is displayed when the size of the
SMBIOS data exceeds the available SMBIOS
runtime storage size
Description
This message is displayed when the power
requirements of the board do not match the power
requirement of the CPU.
Description
This message is displayed when there is not enough
space in the 0F000h runtime area for creating MPS
table.
52