Voice Settings
Choice Lists
Voice SVC uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that Voice SVC uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at "Automatic," Voice SVC
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way Voice SVC uses choice lists:
From the Voice SVC sub-menu, select Voice Settings
Choice Lists the following options appear in the display:
• Automatic—Voice SVC displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On—Voice SVC always displays a choice list, even when
there is only one choice.
• Always Off—Voice SVC never displays a choice list.
Select the preferred Choice List behavior.
89
Sensitivity
From the Voice SVC sub-menu, select Voice Settings
1.
Sensitivity. The Sensitivity screen appears in the display.
2.
Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
To accept the new setting, press
3.
.