Your Phone's Modes; Standby Mode - Samsung Chrono SCH-R261 User Manual

Portable tri-band mobile phone
Hide thumbs Also See for Chrono SCH-R261:
Table of Contents

Advertisement

Your Phone's Modes

Standby Mode

Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
After you power the phone on.
When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Placing Calls in Standby Mode
To place a call while in standby mode, enter a phone
1.
number, and press
To return to standby mode, press
2.
Receiving Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
View Now: This selection allows you to view the messages now.
View Later: This selection allows you to view the messages at a later
date.
Highlight the desired viewing option and then press
17
.
.
.
Adjusting Your Phone's Master Volume
In standby mode, press the Volume key (on the left side of the
phone) up or down.
In standby mode, press the Volume key up or down to set
1.
the call ringer volume as desired.
Options are:
• Silence All
• Vibrate
• Low
• Low/Medium
Tip: You can add vibration to Master Volume settings Low – High. Just press
Vib.on.
When you are satisfied with the setting, press SET. Your
2.
phone returns to standby mode.
Tip: You can also access the Master Volume setting by pressing Menu
Settings
Sound Settings
the left side of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
you press
Vib.on with Master Volume set to Low – High.
• Medium
• Medium/High
• High
Master Volume. Use the Volume key on
) appears in the display when

Advertisement

Table of Contents
loading

Table of Contents