Step 3
Connecting the aerial
Connecting the unit
e.g. SLV-GA55MKII
(For SLV-GA45AV only)
Connect the unit to your TV using the
audio/video cable (supplied) as shown
below to watch video pictures on your TV.
Aerial cable (supplied)
This unit
AUDIO VIDEO
AERIAL OUT
LINE IN
LINE OUT
TV
AERIAL IN
IN
AERIAL IN
VIDEO
AUDIO
to mains
Audio/video cable (supplied)
: Signal flow
(For SLV-GA35MKII, GA55MKII,
* A plug adaptor is included with some models.
GA65MKII and GA59)
Use the plug adaptor to connect the mains lead
Connect the aerial to your unit and TV as
to the mains, if necessary.
shown on the right to watch TV
programmes and video pictures on your TV.
Additional connections
In addition, if your TV has audio/video
(A/V) input jacks, we recommend you
To a TV that has audio/video input jacks
connect the unit to your TV using an
(For SLV-GA35MKII, GA55MKII,
audio/video cable (not supplied) to get a
GA65MKII and GA59)
better picture and sound.
This additional connection improves picture
and sound quality. Connect the TV as
shown below.
This unit
AUDIO VIDEO
LINE IN
LINE OUT
TV
IN
VIDEO
AUDIO
Audio/video cable (not supplied)
If you want to use the Trinitron TV Synchro
Play function, this connection is necessary.
(If your TV has two or more inputs, connect
the audio/video cable to the VIDEO IN 1
jacks.)
Step 4
Tuning your TV to
3
Tune the TV until the video picture
the unit
below is clearly displayed on the TV
screen.
(SLV-GA35MKII, GA55MKII,
GA65MKII and GA59 only)
SONY
VIDEO CASSETTE PLAYER
If you have connected your unit to the TV
using the audio/video cable, skip this step.
?/1 ON/STANDBY
H PLAY
Refer to your TV manual for tuning
instructions.
You have now tuned your TV to the
unit. From now on, whenever you want
to play a tape, set the TV to the video
channel.
1
Press ?/1 ON/STANDBY to turn on
To obtain a clear playback picture
the unit.
If the video picture does not appear clearly
in step 3 above, turn the RF CHANNEL
ON/STANDBY
screw on the rear panel of the unit with a
screwdriver to a position where the TV
2
Turn on your TV and select a
clearly displays the playback picture.
programme position for the video
To select the TV system
picture.
For your TV to receive the correct signal
This channel will now be referred to as
from your unit, you must set the TV
the video channel.
SYSTEM switch on the rear panel of the
Some TV has the programme position,
unit to either G (for system B/G) or K (for
such as 0, that is reserved for a VCR. In
system D/K). If this switch is set to the
this case, select that programme
wrong position, the sound will be distorted.
position for the video picture. Refer to
the instruction manual of your TV for
RF CHANNEL
details.
TV SYSTEM
G
K
SLV-GA35MKII (E) 3-063-086-11 (1)