Page 1 ENGLISH Camera User Guide Please read the Read This First section (p. 6). Please also read the Software Starter Guide and the Direct Print User Guide. CDI-E180-010 XX05CHXX © 2005 CANON INC. PRINTED IN JAPAN...
Page 2: Shooting With The Camera
Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Page 3: About The Lcd Monitor
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques.
Page 4 About This Guide Conventions Used in the Text Icons appearing beside or below titles indicate the modes in which the procedure can be used. In the example below, the procedure can be used in the following modes. When the mode switch is set to Postcard Date Imprint Mode Shooting Mode When the Shooting mode is set to the following modes...
Page 5: Table Of Contents
Table of Contents Items marked with are lists or charts that summarize camera functions or procedures. Please Read... 6 Safety Precautions ... 7 Preventing Malfunctions ... 12 Components Guide... 13 Preparing the Camera Charging the Battery Pack ... 18 Installing the Battery Pack... 21 Installing the SD Card ...
Page 6 Night Snapshot... 68 Kids&Pets... 68 Indoor... 68 Underwater... 68 My Colors... 68 Shooting Close-Ups/ Magnified Close-Up Shooting (Digital Macro) ... 73 Using the Digital Zoom ... 74 Continuous Shooting ... 75 Postcard Date Imprint Mode... 76 Using the Self-timer ... 78 Shooting a Movie...
Page 7 Erasing Erasing Single Images... 131 Erasing All Images ... 132 Print Settings About Printing ... 134 Setting the DPOF Print Settings ... 136 Image Transmission Settings (DPOF Transfer Order) Selecting Images for Transferring ... 142 Connecting the Camera to a Computer Connecting the Camera to a Computer...
Page 8: Read This First
Warning Against Copyright Infringement Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised...
Page 9: Safety Precautions
• Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.
Page 10 There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon Customer Support Help Desk. • Stop operating the equipment immediately if it emits smoke or noxious fumes.
Page 11 • Do not cut, damage, alter or place heavy items on the power cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. • Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock.
Page 12 • Use the specified battery charger to charge Battery Pack NB-4L. Use of other chargers may lead to overheating, distortion of the equipment, fire or electrical shock. • Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when they are not in use to avoid fire and other hazards.
Page 13 Cautions • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries.
Page 14: Preventing Malfunctions
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
Page 15: Components Guide
Components Guide Front View Microphone (p. 124) Terminal Cover DIGITAL Terminal (p. 147) A/V OUT (Audio/Video output) Terminal (p. 155) The interface cable and AV cable cannot be connected simultaneously. How to Open the Terminal Cover You can use this toggle to open the terminal cover or SD card slot/battery cover.
Page 16: Back View
Back View LCD Monitor (p. 37) Tripod Socket Never rub or press strongly on the LCD monitor. These actions may damage it or lead to other problems. Viewfinder Window (p. 44) Battery Compartment (SD card/battery compartment) SD Card Slot/ Battery Cover (pp. 21, 23) DC Coupler Terminal Cover (p.
Page 17: Operation Panel
Operation Panel Power Button (p. 34) Indicators (p. 16) MENU Button (p. 50) Power Lamp Lights when the power is on or transmission preparations are complete when connected to a computer Zoom Lever Shooting: (Wide Angle)/ Playback: (Index) (p. 115)/ Shutter Button (p.
Page 18: Holding The Camera
Holding the Camera Images become blurred if the camera moves when the shutter button is pressed. Hold the camera as shown below to avoid camera movement when shooting. • Make sure that your hair or fingers do not obstruct the lens, flash, self- timer lamp, microphone or speaker.
Page 19 - Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide. • PictBridge Compliant Non-Canon Printers Interface Cable IFC-400PCU (supplied with the camera) Please refer to the System Map or the Direct Print User Guide supplied...
Page 20: Preparing The Camera
Preparing the Camera Charging the Battery Pack Use the following procedures to charge the battery pack the first time you use the camera or when the “Change the battery pack” message displays. Symbol Charge Indicator To protect the battery pack and prolong its life, do not charge it for longer than 24 hours continuously.
Page 21 • It takes approximately 90 minutes to fully charge the battery pack from a fully discharged state (based on Canon’s testing standards). Charging it within a temperature range of 5° to 40 °C (41° to 104 °F) is recommended.
Page 22 Do not allow any metal objects such as key rings to touch the terminals (Fig. A), as this can damage the battery pack. To carry the battery pack or store it during periods of disuse, always replace the terminal cover (Fig.
Page 23: Installing The Battery Pack
Installing the Battery Pack Install Battery Pack NB-4L (supplied). Please recharge the battery pack (p. 18) before you use it for the first time. Battery Lock Symbol Slide the SD card slot/battery cover in the direction of the arrows. Press the battery lock while inserting the battery pack all the way in until the lock clicks.
Page 24 • Please watch the loading slot area carefully as you insert and remove the battery pack. • Do not turn off the power or open the SD card slot/battery cover while the indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card.
Page 25: Installing The Sd Card
Installing the SD Card Write-Protect Tab The SD card has a write-protect tab. Sliding the tab downward prevents recording of data and protects existing data (e.g. images). When recording to, erasing from or formatting the SD card, slide the tab upward. Writing/Erasing Possible Ensure that the SD card is correctly oriented before inserting it in the camera.
Page 26 To Remove the SD card Push the SD card with your finger or the toggle on the wrist strap until it clicks and then release it. • Please watch the loading slot area carefully as you insert and remove the SD card. •...
Page 27 Formatting SD Cards You should always format a new SD card or one from which you wish to erase all images and other data. Please note that formatting (initializing) an SD card erases all data, including protected images and other file types. Power Lamp Press the power button until the power lamp lights green.
Page 28 • When the camera is malfunctioning, a corrupted SD card might be the cause. Reformatting the SD card may solve the problem. • When a non-Canon brand SD card is malfunctioning, reformatting it may solve the problem. • SD cards formatted in other cameras, computers, or peripheral devices may not operate correctly in this camera.
Page 29 Precaution for Multi Media Cards This camera is designed to perform optimally when used with genuine Canon-brand SD cards. You may use multi media cards with this camera. However, Canon makes no warranties concerning the use of multi media cards.
Page 30: Setting The Date And Time
Setting the Date and Time The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium-ion date/time battery charge is low. Start from Step 5 to set the date and time. Power Lamp Press the power button until the power lamp lights green.
Page 31 • Please note that the date and time settings may be lost if the camera battery has been removed for more than three weeks. Reset them when this occurs. • For embedding the date on the image data, refer to page 77. •...
Page 32: Using The Clock
Using the Clock You can display the current date and time for a 5-second* interval using the following methods. This is convenient for confirming the shooting date and time. * Default setting • Holding the FUNC./SET Button While Pressing the Power Button - The start-up image will not display at startup, also the start-up sound will not play.
Page 33: Setting The Language
Setting the Language Use this feature to select the language for the LCD monitor display. Power Lamp Press the power button until the power lamp lights green. Press the MENU button. (Rec.) or displayed. Use the button to select the (Set up) menu.
Page 34 You can display the Language menu directly by holding down the FUNC./SET button and pressing the MENU button while in single image playback or index playback mode. Use the select a language and press the FUNC./SET button. Press the MENU button. The display will return to the shooting or playback screen.
Page 36: Basic Functions
Basic Functions Turning the Power On Power Lamp To Turn the Power Off Press the power button again. • If the “Card locked!” message appears right after the power is turned on, the SD card cannot record (p. 23). • The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium-ion battery charge is low.
Page 37: Power Saving Function
Power Saving Function This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by pressing the power button. Shooting Mode: Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off].
Page 38: Switching Between Shooting/Playback
Switching Between Shooting/Playback The mode switch is used to select Shooting and Playback modes. When a printer is properly connected, the appears on the LCD monitor. To Shoot Still Images (Shooting Mode) Slide the mode switch to To Shoot Movies (Movie Mode) Slide the mode switch to To Play Back Images (Playback Mode) Slide the mode switch to...
Page 39: Using The Lcd Monitor
Using the LCD Monitor The LCD monitor can be used to compose images while shooting, adjust menu settings and play back recorded images. Icons showing the camera’s status and setting contents appear on the LCD monitor. The image in the LCD monitor will darken in strong sunlight or bright light.
Page 40 Playback Mode ( When the mode switch is set to In index playback mode (p. 115), the detailed display is not available. ) (p. 42) , the LCD monitor will turn on. Press the DISP. button. The display mode changes as follows with each press.
Page 41: Lcd Monitor Brightness
LCD Monitor Brightness The brightness of the LCD monitor can be adjusted to better suit the shooting conditions. When shooting in dark conditions, the camera will also automatically brighten the LCD monitor. LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways.
Page 42: Information Displayed On The Lcd Monitor
Information Displayed on the LCD Monitor When shooting or playing back images, the shooting information, review information or replay information appears on the LCD monitor. Shooting Information (Shooting Mode) When setting the flash, continuous mode, self-timer, macro mode, infinity mode, or the metering method, the shooting information displays on the LCD monitor for approximately 6 seconds even if the LCD monitor is set to Standard (No Information) or Off.
Page 43: Af Lock
Spot AE Point Frame ( AF Frame (p. 89) Low Battery (p. 22) Zoom Magnification* (p. 45) Shooting Mode (pp. 68, 81) Exposure Compensation (p. 95) Long Shutter Mode (p. 96) White Balance (p. 98) ISO Speed (p. 109) Photo Effect (p. 101) My Colors (p.
Page 44 Playback Information–Standard (Playback Mode) Protection Status (p. 130) Total number of images Displayed image number Playback Information–Detailed (Playback Mode) White Balance (p. 98) Photo Effect (p. 101) My Colors (p. 102) ISO Speed (p. 109) Resolution (Movies) (p. 65) Frame Rate (Movie) (pp. 65, 85) File Number Compression (Still Images) (p.
Page 45: Histogram Function
The following information may also be displayed with some images. A sound file in a format other than the WAVE format is attached or the file format is not recognized. JPEG image not conforming to Design rule for Camera File System Standards RAW image Unrecognized data type...
Page 46: Using The Viewfinder
Using the Viewfinder The viewfinder can be used to conserve power by turning the LCD monitor off (p. 37) while shooting. Viewfinder Image Seen in Viewfinder vs. Recorded Image Usually the recorded image contains more of the scene than is seen in the viewfinder.
Page 47: Using The Zoom
Using the Zoom The zoom can be adjusted from 35 mm to 105 mm in 35mm film equivalent terms. Telephoto/Wide Angle Digital Zoom When the LCD monitor is on, you can shoot with a combined optical and digital zoom up to approximately 12x (p. 74). Images become coarser the more they are digitally zoomed.
Page 48: Pressing The Shutter Button
Pressing the Shutter Button The shutter button features a two-stage action. 1. Pressing Halfway Automatically sets such settings as the exposure and focus. Indicators Press the shutter button halfway. Beep • Focused: 2 beeps • Focusing difficulty: 1 beep Indicator Status Upper Indicator •...
Page 49: Pressing Fully
2. Pressing Fully Pressing the shutter button down fully activates the shutter and causes the shutter sound to play. Shots cannot be taken while the flash is charging. AF-assist Beam • The AF-assist Beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, e.g., dark conditions.
Page 50: Selecting Menus And Settings
Selecting Menus and Settings Menus are used to adjust shooting and playback settings, as well as other camera settings like the Date/Time and sounds. Menus are displayed by pressing the FUNC./SET or MENU button according to the circumstances. Use the following procedures to select settings. Some menu options may not be selectable in certain shooting modes (p.
Page 51 FUNC. Menu Shooting Mode (p. 68) Movie Mode (p. 81) Exposure Compensation (p. 95) ) Long Shutter Mode (p. 96) White Balance (p. 98) ISO Speed (p. 109) ( ) Items in parentheses show default settings. Photo Effect (p. 101) My Colors (p.
Page 52 Selecting Menu Settings with the MENU Button Slide the mode switch to (Shooting), (Playback). Press the MENU button. In Shooting mode, the appears. In Playback mode, the appears. Use the the Rec./Play, Set up, or My Camera menu. • Select the menu with the icon in the upper left corner of the LCD monitor selected.
Page 53 Press the MENU button. • The menu will close. • In Shooting mode, the menu can be closed by pressing the shutter button halfway.
Page 54 Shooting Mode Rec. Menu Shooting Mode Playback Mode : Selects items. : Selects options. The menu will appear slightly different depending on the Shooting mode Set up Menu My Camera Menu • • Playback Mode Play Menu When the My Camera menu is displayed, pressing the button displays the Rec./Play menu.
Page 55: Menu Settings And Factory Defaults
Menu Settings and Factory Defaults This chart shows the options and default settings for each menu. * Default setting Rec. Menu Menu Item Sets whether or not the camera automatically selects the AF frame or a fixed center AF frame. AiAF •...
Page 56: Play Menu
Menu Item Long Shutter Stitch Assist Play Menu Menu Item Protect Rotate Sound Memo Erase all Slide Show Print Order Transfer Order Options Sets the shutter speed to slow settings. • On • Off* Images are shot in overlapping series to create single panoramic images.
Page 57: Set Up Menu
Set up Menu Menu Item Set to [On] to silence the start-up, shutter, operation and self-timer sounds all at once. See How the [Mute] Option in the Sounds in the • On Mute • Off* However, a warning will still sound when the SD card slot/battery cover is opened while an image is being written to the SD card even if the Mute function is set to [On].
Page 58 Menu Item Power Saving Auto Power Down Display Off Date/Time Clock Display Format File No. Reset Auto Rotate Options Sets the [Auto Power Down] and [Display Off] options. Sets whether or not the camera automatically powers down after a set period of time elapses without something being pressed.
Page 59 Menu Item Sets the language used in menus and messages on the LCD monitor. • English* • Deutsch (German) • Français (French) • Nederlands (Dutch) • • Dansk (Danish) Language • Suomi (Finnish) • Italiano (Italian) • Norsk (Norwegian) • Svenska (Swedish) • •...
Page 60: My Camera Menu
My Camera Menu You can select the start-up image and sound, operation sound, self-timer sound and shutter sound used on this camera. These are called the My Camera settings. You can also customize the options for each item with images recorded on the SD card and newly recorded sounds or by using the supplied software.
Page 61: Resetting Settings To Their Default Values
Resetting Settings to Their Default Values You can reset the menu and button settings to the default settings in one operation. Power Lamp • Settings cannot be reset when the camera is connected to a computer or to a printer. •...
Page 63: Shooting
Shooting Shooting in Auto Mode Shooting Mode In this mode, all you have to do is press the shutter button and let the camera do everything else. Slide the mode switch to (Shooting). In the FUNC. menu, select (Auto). Press the FUNC./SET button. The display will return to the shooting screen and will appear on the LCD...
Page 64: Reviewing An Image Right After Shooting
• See Functions Available in Each Shooting Mode (p. 192). • With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 62). Reviewing an Image Right After Shooting Shooting Mode Right after a shot is taken, the image appears in the LCD monitor for 2...
Page 65 Changing the Review Duration The default review time is 2 seconds. You can set the review time for an image to [Off], a range between 2 and 10 seconds, or [Hold]. In the (Rec.) menu, select [Review]. See Selecting Menus and Settings (p. 48). Use the button to select the review setting and press the MENU...
Page 66: Changing Resolution/Compression Settings
Changing Resolution/Compression Settings Shooting Mode You can change the compression (excluding movies) and resolution settings to suit the purpose of the image you are about to shoot. Resolution (Large) 2592 x 1944 pixels (Medium 1) 2048 x 1536 pixels (Medium 2) 1600 x 1200 pixels (Small) 640 x 480 pixels (Postcard Date Imprint Mode) 1600 x 1200 pixels...
Page 67 Movies can be shot with the following resolutions. Standard My Colors Fast Frame Rate Compact • See Image Data Sizes (Estimated) (p. 179). • See SD Cards and Estimated Capacities (p. 178). Resolution frames/sec. frames/sec. frames/sec. 640 x 480 pixels –...
Page 68: Using The Flash
Using the Flash Shooting Mode Use the flash according to the guidelines below. Auto Auto with red-eye reduction Flash on with red-eye reduction Flash on Flash off Slow Synchro – – – – Setting available The flash fires automatically as required by the light level. The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires.
Page 69 • When you use the flash at higher ISO speeds, the chances of white streaks appearing in the image increase the closer you approach to the subject. • Since a slow shutter speed is selected in dark places when the flash is set to Off or Slow Synchro, take care to avoid camera shake.
Page 70: Selecting A Shooting Mode
Selecting a Shooting Mode Shooting Mode You can take an optimal picture simply by selecting the appropriate shooting mode. Auto Leaves almost all of the settings choices up to the camera (p. 61). Lets you adjust the exposure, white balance, photo effect and Manual other settings yourself.
Page 71 Manual Kids&Pets Portrait Indoor Choose a shooting mode from the FUNC. menu. • See Selecting Menus and Settings (p. 48). • You can shoot right after selecting an option. The menu displays again after the shot, allowing you to change the settings easily. Press the FUNC./SET button.
Page 72 • In shot), the ISO speed may increase and cause noise in the image. • In mode, shoot with the subject 1 m (3.3 ft.) – infinity from the end of the lens. • See Functions Available in Each Shooting Mode (p. 192). •...
Page 73: Shooting Close-Ups/Infinity Shots
Shooting Close-Ups/ Shooting Mode Use this mode to record subjects in the range of 3 to 50 cm (1.2 in. to 1.6 ft.) from the end of the lens at the Macro maximum wide angle setting and in the range of 30 to 50 cm (1.0 to 1.6 ft.) at the maximum telephoto setting.
Page 74 Image Area in Macro Mode When the zoom is set between the maximum telephoto and wide- angle settings, the effective distance from the lens to the subject becomes the same as for the maximum telephoto setting. Distance from Lens to Zoom Setting Image Area Subject...
Page 75: Magnified Close-Up Shooting (Digital Macro)
Magnified Close-Up Shooting (Digital Macro) Shooting Mode Use this mode to shoot a subject in the range of 3 to 10 cm (1.2 to 3.9 in.) from the end of the lens (zoom fixed at maximum wide angle). Since this mode trims all but the image center and magnifies it with the digital zoom, you can make a subject appear even larger than in the normal macro mode.
Page 76: Using The Digital Zoom
Using the Digital Zoom Shooting Mode When the LCD monitor is on, images can be zoomed to approximately 3.8x, 4.9x, 6.1x, 7.6x, 9.3x or 12x with the combined optical and digital zoom functions. The digital zoom cannot be used when the LCD monitor is turned off. •...
Page 77: Continuous Shooting
• The recommended super high-speed SDC-512MSH SD card (sold separately) is used and formatted with a low level format (p. 25). * This figure reflects standard shooting criteria established by Canon. Actual figures may vary according to the subject and shooting conditions.
Page 78: Postcard Date Imprint Mode
Postcard Date Imprint Mode Shooting Mode You can shoot images with the optimal resolution and compression for postcard size printing. • When printing standard image data to postcard size, sometimes the top, bottom and sides may not get printed. • By shooting images in the Postcard Date Imprint mode, you can check the printing area (horizontal/vertical ratio of 3:2) beforehand.
Page 79: Embedding The Date In The Image Data
• The icon appears in the LCD monitor when the date stamp setting (see below) is set to Date or Date & Time. • For printing instructions, refer to the Direct Print User Guide. Embedding the Date in the Image Data You can embed the date in image data when Mode) is selected.
Page 80: Using The Self-Timer
Using the Self-timer Shooting Mode With this function, images are shot 10 or 2 seconds after the shutter button is pressed. This is useful when you want to take a memorable photo with everyone including yourself in the picture. In addition, you can set the delay time and number of shots (Custom Timer).
Page 81 Changing to a 10 or 2 second delay. Changing the delay time and number of shots (Custom Timer). Use the and press the MENU button. • The display will return to the shooting screen. • When is selected, the self-timer sounds and the blinking gets faster 2 seconds before the shutter activates.
Page 82 • The self-timer sound can be changed with the Selftimer Sound item in the • The option cannot be set in the Stitch Assist or movie mode or in a My Colors mode. • The following may occur when the Shots category is set to 2 or more.
Page 83: Shooting A Movie
Shooting a Movie The following four movie modes are available. You can select the resolution and frame rate* yourself and record until the SD card is full (when a super high-speed SD card is used, such as the recommended SDC-512MSH model).
Page 84 In the FUNC. menu, select a movie mode. • See Selecting Menus and Settings (p. 48). • You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. •...
Page 85 • The recording time may not display properly during shooting or filming may stop unexpectedly with the following types of SD cards. - Slow recording cards - Cards formatted on a different camera or a computer - Cards which have had images recorded and erased repeatedly Although the recording time may not display properly during shooting, the movie will be recorded correctly on the SD card.
Page 86 • QuickTime 3.0 or later is required to play back movies (Data type: AVI/ Compression method: Motion JPEG) on a computer. QuickTime (for Windows) is included on the Canon Digital Camera Solution Disk. On the Macintosh platform, this program is standard with Mac OS X or later.
Page 87 Changing the Frame Rate In the (Standard) or of two frame rates (number of frames recorded each second): frames/sec.) or (15 frames/sec.). (My Colors) mode, you can select between one In the FUNC. menu, select • See Selecting Menus and Settings (p. 48). * The current setting is displayed.
Page 88: Shooting Panoramic Images (Stitch Assist)
Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. To merge the images on a computer, use PhotoStitch, one of the supplied programs.
Page 89 Shooting Images can be shot in two sequences in Stitch Assist mode. Left to right horizontally Right to left horizontally In the FUNC. menu, select • See Selecting Menus and Settings (p. 48). In the (Rec.) menu, select [Stitch Assist] and press the FUNC./SET button.
Page 90 • A custom white balance setting cannot be set in Stitch Assist mode. To use a custom white balance setting, set it before selecting [Stitch Assist] in the Rec. menu (p. 99). • The settings for the first image are used to take subsequent images in the sequence.
Page 91: Switching Between Focusing Modes
See Functions Available in Each Shooting Mode (p. 192). Switching between Focusing Modes Shooting Mode Although the autofocus function is preset to the AiAF setting (9 AF frames), you can set it to the center AF frame. When [AiAF] is set to [On], the AF frame does not appear. When [AiAF] is set to [Off], however, the AF frame will appear.
Page 92: Shooting Hard-To-Focus Subjects (Focus Lock, Af Lock)
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Shooting Mode It may be difficult to focus on the following types of subjects. Use the focus lock or AF lock in these situations. • Subjects with extremely low contrast to the surroundings •...
Page 93 Shooting with the AF Lock The AF lock can be used in the To Release the AF Lock Press the button. • When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 89) is recommended since the camera focuses using the center AF frame only.
Page 94: Locking The Exposure Setting (Ae Lock)
Locking the Exposure Setting (AE Lock) Shooting Mode You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to fires.
Page 95: Locking The Flash Exposure Setting (Fe Lock)
Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set for a particular portion of your subject. Press the DISP. button to turn the LCD monitor on. Press the button to set the flash Focus on the part of the subject on...
Page 96: Switching Between Metering Modes
To Release the FE Lock Press the button. The FE lock may be released by pressing the zoom lever, MENU button or button, or by changing the white balance, ISO speed, photo effect or the shooting mode, or by turning the LCD monitor off. Switching between Metering Modes Shooting Mode You can switch between metering modes to shoot.
Page 97: Adjusting The Exposure Compensation
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. To Reset the Exposure Compensation Return the setting to 0.
Page 98: Shooting In Long Shutter Mode
Shooting in Long Shutter Mode Shooting Mode You can set the shutter speed to a slow setting to make dark subjects appear brighter. In the (Rec.) menu, select [Long Shutter]. See Selecting Menus and Settings (p. 48). Use the [On] and press the MENU button. The display will return to the shooting screen.
Page 99 To Cancel the Long Shutter mode While [Long Shutter] is displayed in the FUNC. menu, press the MENU button. The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images.
Page 100: Adjusting The Tone (White Balance)
Adjusting the Tone (White Balance) Shooting Mode When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Combinations of setting contents and light source are as follows. Auto Day Light Cloudy Tungsten Fluorescent Fluorescent H Custom...
Page 101: Setting A Custom White Balance
This setting cannot be adjusted when the photo effects are selected. Setting a Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color.
Page 102: Menu Button
• You are recommended to set the shooting mode to exposure compensation setting to zero (±0) before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white).
Page 103: Changing The Photo Effect
Changing the Photo Effect Shooting Mode By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. Effect Off Vivid Neutral Low Sharpening Records subjects with softened outlines. Sepia Records normally with this setting. Emphasizes the contrast and color saturation to record bold colors.
Page 104: Shooting In A My Colors Mode
Shooting in a My Colors Mode Shooting Mode A My Colors mode easily changes the colors in an image when it is shot, allowing you to alter the balance between red, green and blue, transform pale or tanned skin or change a color specified in the LCD monitor into a different color.
Page 105 • See Functions Available in Each Shooting Mode (p. 192). • In the My Colors modes (depending on the scene being shot), the ISO speed my increase and cause noise in the image. Slide the mode switch to In the FUNC. menu, select See Selecting Menus and Settings (p.
Page 106: Changing The Save Method For The Original Image
Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. Save Original is Set to [On] •...
Page 107: The Button
Shooting in the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. • The default color accent is green. • You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings.
Page 108 Shooting in the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another. Original Color (Before Swapping) Desired Color (After Swapping) In the FUNC. menu, select See Shooting in a My Colors Mode (p. 102). Press the MENU button.
Page 109 • The default setting for color swap mode changes green into white. • You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. • The colors specified in the color swap mode are retained even if the camera's power is turned off.
Page 110 Shooting in the Custom Color Mode This mode allows you to adjust the color balance for red, green, blue and skin tones. Adjust the Select a color. color balance. In the FUNC. menu, select press the MENU button. See Shooting in a My Colors Mode (p. 102). Use the [Red], [Green], [Blue] or [Skin Tone] and the...
Page 111: Adjusting The Iso Speed
Adjusting the ISO Speed Shooting Mode Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed. • Higher ISO speeds increase image noise. To take clean images, use as low an ISO speed as possible.
Page 112: Setting The Auto Rotate Function
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display. You can set this function on/off.
Page 113: Resetting The File Number
Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. The file number is reset to the start (100-0001) each time a new SD card is inserted. New images recorded on SD cards with existing files are assigned the next available number.
Page 114 About File Numbers and Folder Numbers Images are assigned file numbers from 0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits). Folder numbers cannot contain 99 in the last two digits Folder File Capacity Each folder usually contains up to 100 images.
Page 115: Playback
Playback Displaying Images Individually Slide the mode switch to (Playback). The last recorded image will appear in the display (single image playback). Use the between the images. Use the button to move to the previous image and the button to move the next image.
Page 116: Magnifying Images
Magnifying Images Approximate Location of the Magnified Area To Cancel the Magnified Display Press the zoom lever toward pressing the MENU button. Movie frames and index playback images cannot be magnified. Press the zoom lever toward will appear on the monitor. You can press the zoom lever toward display the image at a magnification of up to 10x.
Page 117: Viewing Images In Sets Of Nine (Index Playback)
Viewing Images in Sets of Nine (Index Playback) Press the zoom lever toward Up to nine images can be viewed at once in index playback. Selected Image Movie Use the change the image selection. button to...
Page 118 Switching between Sets of Nine Images Jump Bar To Return to Single Image Playback Press the zoom lever toward Press the zoom lever toward while in index playback. The jump bar will display. Use the the previous set or the next set of images.
Page 119: Jumping To Images
Jumping to Images When you have many images recorded onto an SD card, it is handy to use the four search keys below to jump over images to find the object of your search. • Jump 10 Images: jumps over 10 images at a time •...
Page 120: Viewing Movies
Viewing Movies You can play movie clips shot in Movies cannot be played in the index playback mode. Movie Control Volume Level Panel mode. Use the movie. Images with a Press the FUNC./SET button. • The movie control panel will display. •...
Page 121: Operating The Movie Control Panel
Pausing and Resuming Play Operating the Movie Control Panel Press the FUNC./SET button during playback. The movie playback pauses. Press the FUNC./SET button again to resume. Select a movie and press the FUNC./SET button (p. 118). The movie control panel will display. Use the one of the following and press the FUNC./SET button.
Page 122 • Movies recorded with high resolutions and frame rates may momentarily stop playing if played on slow reading SD cards. • Movies recorded at the video signal set to the PAL format, may play back with a frame rate lower than the recorded one when output to a TV or video. You can play every frame by using the slow motion playback.
Page 123: Editing Movies
Editing Movies Selecting (Edit) in the movie control panel enables you to cut unwanted portions at the start or end of a movie clip. Protected movies and movies less than 1 second in duration cannot be edited. Movie Editing Panel Movie Editing Bar Use the movie and press the FUNC./SET...
Page 124 • The minimum duration of a movie that can be edited is 1 second. • It may take approximately 3 minutes to save an edited movie. If the battery pack runs out of charge partway through, edited movie clips cannot be saved. When editing movies, use a fully charged battery pack or the separately sold AC Adapter Kit ACK-DC10 (p.
Page 125: Rotating Images In The Display
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. 0° (Original) • Movies cannot be rotated. • When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images.
Page 126: Attaching Sound Memos To Images
Attaching Sound Memos to Images In Playback mode (including single image playback and index playback, you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format. Sound Memo Panel Exiting Sound Memos Press the MENU button.
Page 127: Playing/Erasing Sound Memos
Playing/Erasing Sound Memos Sound Memo Panel • You cannot attach sound memos to movies. • The “Memory card full” message will display when the SD card is full and you will be unable to record sound memos to that card. •...
Page 128: Automated Playback (Slide Shows)
Automated Playback (Slide Shows) Starting a Slide Show A selection of images or all the images on an SD card can be displayed one- by-one in an automated slide show. Slide show image settings are based on DPOF standards (p. 136). All Images Plays all images on the SD card in order.
Page 129: Selecting Images For Slide Shows
• Movies play for their entire recorded length regardless of the time set in the slide show settings. • The power-saving function does not activate during a slide show (p. 56). Pausing/Resuming a Slide Show Fast Forwarding/Rewinding a Slide Show Stopping a Slide Show Selecting Images for Slide Shows You can mark images for inclusion in slide shows 1-3.
Page 130 Use the [Program] and the select [Show 1], [Show 2] or [Show 3]. A white checkmark will appear beside a show already containing images. Use the button to choose [Select] and press the FUNC./SET button. You can select all the images by choosing All Images, pressing the FUNC./SET button and selecting [OK] in the next screen.
Page 131: Adjusting The Play Time And Repeat Settings
Adjusting the Play Time and Repeat Settings You can change the play time for all the images in a show and have the show repeat continuously. Sets the duration that each image displays. Choose between 3-10 Play Time seconds, 15 seconds, 30 seconds and Manual. Sets whether the slide show stops when all the slides have been Repeat displayed or continues until stopped.
Page 132: Protecting Images
Protecting Images You can protect important images and movies from accidental erasure. Protection Icon To Cancel Protection After step 1, select an image to remove protection from and press the FUNC./SET button. Please note that formatting (initializing) an SD card erases all data, including protected images (p.
Page 133: Erasing Single Images
Erasing Erasing Single Images • Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • Protected images cannot be erased with this function. This is not available during index playback. Use the image for deletion and press the button.
Page 134: Erasing All Images
Erasing All Images You can erase all the images saved on the SD card. • Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • Protected images cannot be erased with this function. You should format the SD card when you want to erase not only image data but also all the data contained on the card (p.
Page 136: Print Settings
(SD card) to a photo developing center Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant printers in addition to Canon-brand compact photo printers (SELPHY CP series), card photo printers and Bubble Jet Printers (PIXMA series/SELPHY DS series).
Page 137 This guide explains DPOF print settings. For information on how to print images, refer to the Direct Print User Guide supplied with the camera. Also, refer to your printer’s manual. Please check the System Map to confirm the compact photo printer (SELPHY CP series), card photo printer models and Bubble Jet Printers (PIXMA series/ SELPHY DS series) that can be used with this camera.
Page 138: Setting The Dpof Print Settings
Setting the DPOF Print Settings You can select images on an SD card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service that supports DPOF, or for printing on a direct print compatible printer.
Page 139 Number of Print Copies Selected for an Index Print All the Images on an SD Card Select images for printing. As shown below, selection methods differ according to the options chosen for the Print Type settings (p. 140). Print Type •...
Page 140 • The symbol will display on images that have had print settings set by other DPOF-compliant cameras. These settings will be overwritten by those set by your camera. • The output of some printers or photo developing services may not reflect the specified print settings.
Page 141 • Images are printed in order from oldest to newest by the shooting date. • A maximum of 998 images can be selected per SD card. • When [Both] is selected, the number of print copies can be set, but it applies to Standard prints only.
Page 142: Setting The Print Style
Setting the Print Style Set the print style after selecting the image to print. The following print settings can be selected. Standard Index Print Type Date File No. Prints one image per page. Prints the selected images together at a reduced size in an index format.
Page 143 • When the print type is set to [Index], the [Date] and [File No.] options cannot be set to [On] at the same time. • f you selected [Standard] or [Both] as the Print Type, you can also set the Date and File No. settings to [On] at the same time. However, the data that is supported may vary among printers.
Page 144: Image Transmission Settings (Dpof Transfer Order)
Image Transmission Settings (DPOF Transfer Order) You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.
Page 145 Selected for Transfer All the Images on an SD Card Use the between images and the FUNC./SET button to select and deselect them. • A checkmark displays on selected images. • You can press the zoom lever toward to switch to the index mode (9 images) and use the same procedures to select images.
Page 146 • Images are transferred in order from oldest to newest by the shooting date. • A maximum of 998 images can be selected per SD card. Use the [Mark all] and press the FUNC./SET button. All transfer settings for the image are canceled when you select [Reset].
Page 147: Connecting The Camera To A Computer
Connecting the Camera to a Computer The following methods can be used to download images recorded by the camera to a computer. Depending on the OS used, some methods may not be available. Please read Computer System Requirements (p. 146) in advance.
Page 148: Connecting The Camera To A Computer
- ZoomBrowser EX: 250 MB or more (Including the PhotoRecord printing program) - PhotoStitch: 40 MB or more • Canon Camera TWAIN Driver: 25 MB or more • Canon Camera WIA Driver: 25 MB or more • ArcSoft PhotoStudio: 50 MB or more...
Page 149 IMPORTANT You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to a computer. • The camera will not operate correctly if you connect it to your computer before installing the driver and software.
Page 150 Slide the mode switch to Press the power button until the power lamp lights green. Select [Canon CameraWindow] in the event dialog that appears on the computer and click [OK] (first time only). If the event dialog fails to appear, click the [Start] menu, and select [Programs] or [All Programs], followed by [Canon Utilities], [CameraWindow], and [CameraWindow].
Page 151 See Downloading Images by Direct Transfer (p. 152). Macintosh Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (first time only). Please see the Software Starter Guide for the installation procedures. Set the auto start settings for ImageBrowser.
Page 152 [Other]. 3.Select [CameraWindow] in the program selection window. CameraWindow is generally installed into the folder opened by selecting the [Applications], [Canon Utilities] and [CameraWindow] folders. 4.Click [OK] and then close Image Capture. ImageBrowser Auto Start Settings – OS X (v10.1) 1.Start Image Capture and select [Other] from the [Hot Plug...
Page 153 Perform steps 2-4 on page 147. The following window will display. • Using the software and computer to download images: See the Software Starter Guide. • Using the Camera to Download Images (Direct Transfer Function) See Downloading Images by Direct Transfer (p. 152).
Page 154: Downloading Images By Direct Transfer
Downloading Images by Direct Transfer Use this method to download images using camera operations. Install the supplied software and adjust the computer settings before using this method for the first time (p. 147). All Images New Images DPOF Trans. Images Select &...
Page 155 Select & Transfer/Wallpaper Only JPEG images can be downloaded as wallpaper for the computer. On the Windows platform, the files are automatically created in the BMP images. The option selected with the camera's power is turned off. The previous setting will be in effect the next time the Direct Transfer menu is displayed.
Page 156: Connecting The Camera To The Computer To Download Images Without Installing Software
If you are using Windows XP or Mac OS X (v10.1.5 – v10.3), you can use the software distributed with these operating systems to download images without installing the software bundled on the Canon Digital Camera Solution Disk. This is useful for downloading images to a computer in which the software is not installed.
Page 157: Viewing Images On A Tv Set
Viewing Images on a TV set Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable AVC-DC300. Power Lamp VIDEO AUDIO...
Page 158 • A TV set cannot be used in Stitch Assist mode. • Refer to pp. 50, 57 for instructions regarding the video output signal. • No image will appear on the LCD monitor when the camera is connected to a TV. •...
Page 159: Customizing The Camera (My Camera Settings)
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, operation, self-timer and shutter sounds. Each menu item has three choices. Example: Start-up Image option features science fiction related images and sounds. The option features animals.
Page 160 • If you select theme for each of the My Camera settings. • The beep will not play but the start-up image will display if the [Mute] option in the been selected in the My Camera menu. Press the MENU button. •...
Page 161: Registering My Camera Settings
Registering My Camera Settings Images recorded onto the SD card and newly recorded sounds can be added as My Camera settings to the use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. Start-up Image Shutter Sound •...
Page 162 Press the DISP. button. Select an image or record a sound. Start-up Image Use the button to select the image you wish to register and press the FUNC./ SET button. Start-up, Operation, Self-timer and Shutter Sounds • Use the button to select (Record) and press the FUNC./SET button.
Page 163 • The following cannot be registered as My Camera Settings. - Movies - Sounds recorded with the sound memo function (p. 124) • The prior setting is erased when a new My Camera setting is added. Data that can be Registered as My Camera Settings My Camera settings should conform to the data types below.
Page 164: List Of Messages
List of Messages List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... No memory card Card locked! Cannot record Memory card error!
Page 165 A problem exists if the error code reappears. Note the number and contact your Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image...
Page 166: Troubleshooting
• Format SD card. formatted correctly • If reformatting does not work, the SD card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. SD card is write- • Slide the write-protect tab of the protected.
Page 167 Problem Cannot play back File name was changed with a computer or file location was changed Lens will not retract SD card slot/battery cover was opened with power on SD card slot/battery cover was opened while recording to the SD card (warning signal sounds) Battery pack...
Page 168 Problem Image is blurred or out of focus Subject in recorded image is too dark Subject in recorded image is too bright Cause Subject is out of • For normal shooting conditions, focal range stay at least 30 cm (1.0 ft.) from the subject.
Page 169 Problem Subject in recorded Light is shining image is too bright directly on the subject or reflected off the subject into the camera Flash is set to on A bar of light (red, Subject is too bright • This is a normal occurrence in purple) appears on the LCD monitor Noise displays on...
Page 170 Problem Zoom does not operate Reading images from SD card is slow Recording images to SD card takes a long time Cause Zoom lever was • Operate the zoom before pressed while shooting in movie mode. shooting in a movie mode other than Standard.
Page 171: Appendix
Appendix Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK-DC10 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter.
Page 172: Using An Externally Mounted Flash (Sold Separately)
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation.
Page 173 • If the battery is used in cold regions (0 °C /32 °F or lower), you are recommended to carry a spare lithium battery (CR123A or DL123). Keep the spare battery warm in your pocket until immediately before using it, and exchange it frequently with the battery in the flash. •...
Page 174: Camera Care And Maintenance
Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk as listed on the separate Canon Customer Support leaflet.
Page 175: Specifications
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot SD400 DIGITAL ELPH/DIGITAL IXUS 50 Camera Effective Pixels Approx. 5.0 million Image Sensor 1/2.5-inch CCD (Total number of pixels: Approx. 5.3 million) Lens 5.8 (W) – 17.4 (T) mm (35mm film equivalent: 35 (W) –...
Page 176 Sensitivity White Balance Built-in Flash Flash Range Shooting Modes Continuous Shooting Self-timer Recording Media File Format Data Type Compression Number of Recording Pixels Auto*, ISO 50/100/200/400 equivalent *Camera automatically sets the optimal speed. TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom Auto, auto with red-eye reduction, flash on with red- eye reduction, flash on, flash off, slow synchro...
Page 177 Sound memos (up to 60 sec.), Slide show or Movie (slow motion play back possible). Direct Print PictBridge compliant, and Canon Direct Print and Bubble Jet Direct compatible Display Languages 21 languages available for menus and messages...
Page 178 Weight (camera body only) *1 This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Page 179 Power is left off for a sufficient amount of time*, then the power is turned back on and the testing procedure is repeated. • A Canon-brand SD memory card is used. *Until the battery returns to normal temperature Playback: Normal temperature (23 humidity (50% ±...
Page 180 SD Cards and Estimated Capacities Still Images (2592 x 1944 pixels) (2048 x 1536 pixels) (1600 x 1200 pixels) (640 x 480 pixels) Movie (640 x 480 pixels) Standard My Colors (320 x 240 pixels) Fast Frame (320 x 240 pixels) Rate Compact (160 x 120 pixels)
Page 181 • Maximum movie clip length at (Compact): 3 min. The figures indicate the maximum continuous recording time. • (Large), (Medium 1), indicate the recording resolution. • (Superfine), (Fine) and setting. • indicate the number of frames per second. Image Data Sizes (Estimated) Still Images Resolution (2592 x 1944 pixels)
Page 182: Sd Memory Card
SD Memory Card Interface Dimensions Weight Battery Pack NB-4L Type Nominal Voltage Typical Capacity Cycle Life Operating Temperatures Dimensions Weight Battery Charger CB-2LV/CB-2LVE Rated Input Rated Output Charging Time Operating Temperatures Dimensions Weight Compact Power Adapter CA-DC10 (Included with the separately sold AC Adapter Kit ACK-DC10) Rated Input Rated Output Operating Temperatures...
Page 183: Photo Tips And Information
Photo Tips and Information Tip for Using the Self-timer (p.78) Normally the camera shakes a little when you press the shutter button. Setting the self-timer to allows the camera to stop shaking, thus preventing a blurred image. Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot.
Page 184 ISO Speed (p.109) The ISO speed is the numeric representation of the camera’s sensitivity to light. The higher the ISO speed, the higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake.
Page 185: Index
Index AC Adapter Kit ACK-DC10 ... 169 AE Lock ... 92 AF Frame ... 46 AF Lock ... 91 AF-assist Beam... 47 AiAF... 44 Auto Play (Slide Show)... 126 Auto Rotate Function... 110 Autofocus... 44 AV Cable AVC-DC300 ... 155 Battery Capacity...
Page 186 Rec. Menu... 53 Set up Menu... 55 Messages... 162 Metering Modes... 94 Mode switch ... 36 Movie Editing... 121 Playback... 118 Shooting ... 81 Mute Mode ... 55 My Camera Menu Changing... 157 Registering... 159 My Camera Settings... 157 Recordable Data Types ... 161 My Colors ...
Page 187 MEMO...
Page 188 MEMO...
Page 189 MEMO...
Page 190 MEMO...
Page 191 MEMO...
Page 192 • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice. • No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.
Page 193 • Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Page 194: Functions Available In Each Shooting Mode
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting. Function Large Medium 1 Medium 2 Resolution Small Postcard Movie...
Page 195 Function Evaluative Metering Center-Weighted Average Method Spot Exposure Compensation Long Shutter White Balance Photo Effect ISO Speed Auto Rotate * Default setting Setting available (Shaded Area): Setting is memorized even when the camera power is shut off. With the exception of the [Date/Time], [Language] and [Video System] settings, all the other menu settings and changes made with the camera buttons can be reset to the default values in a single operation (p.

This manual is also suitable for:

Digital ixus 50

Canon PowerShot SD400 Digital Elph User Manual

Read this First

Preparing the Camera

Basic Functions

Shooting

Print Settings

Image Transmission Settings (DPOF Transfer Order)

Connecting the Camera to a Computer

Viewing Images on a TV Set

Customizing the Camera (My Camera Settings)

List of Messages

Appendix

Quick Links

Related Manuals for Canon PowerShot SD400 Digital Elph

Summary of Contents for Canon PowerShot SD400 Digital Elph

This manual is also suitable for:

Table of Contents