[System Settings]; [Network Settings] - Sony BDV-E385 Operating Instructions Manual

[System Settings]

x [OSD Language]
You can select your language for the system on-
screen displays.
x [HDMI Settings]
[Control for HDMI]
[On]: On. You can operate mutually between
components that are connected with an HDMI
cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the
system to a TV's HDMI IN jack that is
compatible with the Audio Return Channel
function.
[Auto]: The system can receive the digital audio
signal of the TV automatically via an HDMI
cable.
[Off]: Off.
• This function is available only when [Control for
HDMI] is set to [On].
x [Quick Start Mode]
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
[Off]: The default setting.
x [Auto Display]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x [Software Update Notification]
[On]: Sets the system to inform you of newer
software version information (page 40).
44
US
[Off]: Off.
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when you stop playback of the disc.
To download, the system must be connected to
the network.
[Manual]: Downloads disc information when
[Video Search] or [Music Search] is selected.
x [System Information]
You can display the system's software version
information and the MAC address.
x [Software License Information]
You can display the Software License
Information.

[Network Settings]

x [Internet Settings]
Connect the system to the network beforehand.
For details, see "Step 3: Preparing for Network
Connection" (page 20).
[Wired Setup]: Select this when you connect to
a broadband router using a LAN cable.
[Wireless Setup(built-in)] (BDV-E390/BDV-
E385/BDV-T39 only): Select this when you use
the wireless LAN that is built into the system for
wireless network connection.
[USB Wireless Setup] (BDV-E490/BDV-E290/
BDV-E190 only): Select this when you use a
USB Wireless LAN Adapter for wireless
network connection.
[View Network Status]: Displays the current
network status.
• For further details, visit the following website and
check the FAQ:
http://www.sony.com/blurayhtsupport/
x [Network Connection Diagnostics]
You can run the network diagnostic to check if
the network connection has been made properly.