Sony BDV-E385 Operating Instructions Manual page 21

For BDV-E490/BDV-E290/BDV-
E190
Select the method based on your LAN (Local
Area Network) environment.
Front panel of the unit
1
Broadband
router
LAN
LAN cable
(not supplied)
DIGITAL IN
OPTICAL
OUT ARC
TV VIDEO OUT LAN (100)
Rear panel of the unit
1 Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the unit.
• A shielded interface cable (LAN cable), straight or
crossover, is recommended.
2 USB Wireless Setup
Use a wireless LAN via the USB Wireless LAN
Adapter (Sony UWA-BR100* only).
The USB Wireless LAN Adapter may not be
available in some regions/countries.
* As of November 2011.
Turn the unit off before connecting the
extension cable or inserting the USB Wireless
LAN Adapter. After inserting the USB Wireless
LAN Adapter to the base and connecting the
extension cable to the
unit on again.
FUNCTION
2
USB Wireless LAN
Adapter
(not supplied)
L
R
FM COAXIAL
75
AUDIO IN ANTENNA
(USB) port, turn the
Before performing the network
settings
When your wireless LAN router (access point)
is Wi-Fi Protected Setup (WPS)-compatible,
you can easily set the network settings with the
WPS button.
If not, check the following information in
advance, and record it in the space provided
below.
• The network name (SSID*) that identifies
your network**.
• If security is set on your wireless network, the
security key (WEP key, WPA key)**.
*
SSID (Service Set Identifier) is a name that
particular wireless network.
** You need to check the settings of your wireless
LAN router to get the information about SSID and
security key. For details:
– visit the following website:
http://www.sony.com/blurayhtsupport/
– refer to the instruction manual supplied with the
wireless LAN router
– consult the manufacturer of the wireless LAN
router
About wireless LAN security
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this system supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
x No Security
Although you can easily make settings, anyone
can intercept wireless communication or intrude
into your wireless network, even without any
sophisticated tools. Keep in mind that there is a
risk of unauthorized access or interception of
data.
x WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your wireless
network. WEP is a legacy security technology
that enables older devices which do not support
TKIP/AES to be connected.
identifies a
21
US