Sony KDF-50E2000 Operating Instructions Manual page 16

To
Set a programme to be displayed
automatically on the screen when it starts
– Reminder
Set the time and date of a programme you
want to record – Manual timer REC
Cancel a recording/reminder – Timer list
Tip
You can also display the Digital Electronic Programme Guide (EPG) by selecting "Digital EPG" in the "MENU".
16
GB
Do this
F f G g
1
Press / / / to select the future programme you want to
display.
2
Press .
F f
3
Press / to select "Reminder".
4 Press to automatically display the selected programme
when the programme starts.
A c symbol appears by that programme's information.
Note
If you switch the TV to standby mode, it will automatically turn itself on
when the programme is about to start.
1 Press .
F f
2
Press / to select "Manual timer REC", then press
F f
3
Press / to select the date, then press
4 Set the start and stop time in the same way as in step 3.
F f
5
Press / to select the programme, then press
TV and your VCR timers.
A symbol appears by that programme's information. The
indicator on the TV (front) lights up.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
• If an age restriction for programmes has been selected, a message asking for pin
code will appear on the screen. For more details refer to "Parental Lock" on
page 29.
1 Press .
F f
2
Press / to select "Timer list".
F f
3
Press / to select the programme you want to cancel, then
press .
A display appears to confirm that you want to cancel the programme.
g
4
Press to select "Yes", then press
.
g
.
to set the
to confirm.