Switching on the set
1
Connect the display unit and media
receiver unit to the mains (100 - 240V
AC; 50/60Hz for the display unit, 220 -
240V AC; 50/60Hz for the media
receiver unit).
PROG
1
2
3
4
5
6
PC
MEMORY STICK
PROG
2
The first time that the TV set is
PROG
connected, it is usually turned on. If the
1
2
3
4
5
6
PC
MEMORY STICK
PROG
TV is off, press the
Power switch on
the media receiver unit to turn on the
TV.
Selecting the language of the
menu screens, the country and
5
setting the current time
This TV set works with menu screens. By following the
instructions below, you can select the desired language
of the menu screens, the country in which you wish to
operate the TV set and set the current time.
The first time you press the
VIDEO
TV
displays automatically on the TV screen.
1
2
m
OK
PROG
MENU
m
3
m
Automatically Tune
6
the TV
You need to tune the TV to receive channels (TV Broadcast).
By following the instructions below, this set automatically
searches and stores all available channels for you.
Power switch, a Language menu
VIDEO
TV
Press the
/
/
or
button on the
remote control to select the language,
then press the OK button to confirm
your selection.
From now on all the menus will appear
in the selected language.
The Country menu appears
automatically on the TV screen.
OK
Press the
or
button to select the
country in which you will operate the
TV set, then press the OK button to
PROG
confirm your selection.
MENU
• If the country in which you want
to use the TVset does not appear
in the list, select "off" instead of
a country.
• If you change the country
selection, Clock Set should
always be performed next.
The Clock Set menu appears on the TV
screen.
a) Press
or
to set the hour, then
press
.
b) Press
or
to set the minutes, then
press
.
c) Press
or
to set the day of a
week, then press OK at the time
signal.
The clock starts.
If you adjust the clock, Auto Tuning
should always be performed next.
The Auto Tuning menu appears on the TV
screen.
Your television stations are now stored in your television's memory.
7
Changing the Programme Order
of the broadcast channels
By following the instrutions below, you can rearrange the
order in which the broadcast channels appear on the screen
1
Press the OK button on the remote
control to select Yes.
m
2
The TV starts to automatically search
and store all available broadcast
channels for you.
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the auto tuning
is in progress, otherwise the auto
tuning will not be completed.
If no channels were found during
the auto tuning process then a
new menu appears automatically
on the screen asking you to
m
connect the aerial. Please connect
the aerial (refer to the step 4) and
press OK. The auto tuning
process will start again.
When the auto tuning is finished, the
Programme Sorting menu appears on
the screen.
8
a) If you wish to keep the broadcast channels
TV
VIDEO
in the tuned order:
Press the MENU button on the remote
control to exit and return to the normal
TV screen.
Your set is now ready for use.
b) If you wish to store the broadcast
OK
channels in a different order:
1
Press the
or
button to select the
PROG
programme number with the channel
(TV Broadcast) you wish to rearrange,
MENU
then press the
button.
2
Press the
or
button to select the
new programme number position for
m
your selected channel (TV
Broadcast), then press
.
The selected broadcast channel
now moves to its new programme
position and the other broadcast
channels move accordingly.
3
Repeat steps 1) and 2) if you wish to
change the order of the other channels.
4
Press the MENU button on the remote
control to exit and return to the normal
TV screen.
The TV set is now ready for use.
Comments to this Manuals
Latest comments: