Replacing Belt - Panasonic MC-CG973 Operating Instructions Manual

Agitator Assembly
Assemblage de l'agitateur
Agitator Support
Montaje del agitador
Support de l'agitateur
Soporte del agitador
Cover
Couvercle
Cubierta

Replacing Belt

Motor Shaft
Arbre du moteur
Eje del transmissión
del motor
Base
Base
Base
➢ ➢ Install new belt in belt groove on
the agitator assembly, then over the
motor shaft.
➢ ➢ Place agitator assembly back into
POWER NOZZLE.
➢ ➢ Line up front of cover and base.
➢ ➢ Rest cover on front edge of base as
shown.
➢ ➢ Tilt cover to back.
➢ ➢ Press cover firmly until tabs snap
into place.
➢ ➢ Replace cover screws.
- 42 -