Page 1
H3C WX5540H Access Controller Installation Quick Start-6W103 H3C WX5540H无线控制器 快速安装指南-6W103 BOM: 3104A0FH Mounting the access controller on a workbench Tool list 工具参考 安装设备到工作台 The installation tools are not provided with the access controller. Prepare them yourself. 设备不随机提供安装工具,请用户根据实际安装需求自己准备安装工具。 Make sure the workbench is stable and is reliably grounded.
Page 2
Mounting the access controller in a rack 安装设备到机柜 Secure the rear mounting brackets to the rack posts. If the distance between the front and rear rack posts is large, orient the rear mounting brackets with the long arms facing forward. To avoid bodily injury and access controller damage, use a minimum of two people to 固定后挂耳到立柱上。当机柜方孔条距离较大时,后挂耳的悬臂可以向机柜前方安装。...
Page 3
To connect the grounding cable when you mount the access controller on a workbench: Installing a power module 安装电源模块 1. Connect one end of the grounding cable to the access controller and secure it with the Do not install AC and DC power modules on the same access controller. grounding screw provided with the access controller.