Panasonic TH-50PX600U Operating Instructions Manual page 5

Accessories/Options
Preventing the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
For 42'' Plasma television
Accessories for pedestal security
1 2
Band (1) Screw (3)
Nominal diameter
4 mm x 10
Securing to a base
screw
2
D
Band
1
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
For 50'' Plasma television
Accessories for pedestal security
2
1 Band (2) Screw (2)
Nominal diameter
4 mm x 12
Securing to a base
Front
Screw
D
Wood
Worktop
Band
Wood Screw
Fasten with wood screws in the holes in the back
edge of the wood worktop. If there are no holes,
first drill them in the middle of the thickness of the
wood worktop, and then fasten the strap with wood
screws.
8
3 4
Wood screw (1) Clamp (2)
Securing to a wall
screw 2
Wood screw
3
Clamp 4
* Use strong wire or chain which is commercially
available to secure the plasma television to a
solid area of the wall or a pillar.
3 4
Wood screw (2) Clamp (2)
Securing to a wall
* Remove the screws at both
Clamp
top corners on the rear side of
the plasma TV, and attach the
clamps 4 to the plasma TV
using the removed screws.
Screws on main body
* Use strong wire or chain which
is commercially available to
Clamp
secure the plasma television
• Securing method
to a solid area of the wall or a
pillar.
Accessories for pedestal security
1 Band (3)
Securing to a base
Wall
Screw
D
Wood
screw
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
For 58'' Plasma television
2 Screw (3) 3 Wood screw (3) 4 Hook (2)
Nominal diameter
4 mm x 12
Securing to a wall
Hook
Hook securing
screw 5
• Securing method
Band
Hook
5 Hook securing
screw (2)
M8 x 35
* Use a flat-head screwdriver to remove
the caps at the left and right top on the
rear side of the plasma TV, and attach
the hooks 4 to the plasma TV using
the hook securing screws . (Keep
5
the caps you have removed in a safe
place.)
* Use a strong wire or chain which is
commercially available to secure the
hooks 4 to a solid area of the wall or
pillar.
9