Panasonic TH-42PX60U Operating Instructions Manual page 41

Digital high definition plasma television
Hide thumbs Also See for TH-42PX60U:
Table of Contents

Advertisement

Photo:
Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF
standards
Data format:
Baseline JPEG 160X120-2,560X1,920 pixels (Sub-sampling: 4:4:4, 4:4:2 or 4:2:0)
Max. number of files:
9,999
Image resolution:
8 x 8 to 5,120 x 3,840
Caution
A JPEG image modified with a PC cannot be displayed.
Partly degraded files might be displayed at a reduced resolution.
Note
Folder structure viewed in PC
DCIM
100_PANA
P1000001.JPG
P1000002.JPG
P1000003.JPG
P1000004.JPG
The folder and file names may be different depending on the digital camera used.
Suitable SD Memory Cards. Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs (This site is in English only)
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier
to the DIGITAL AUDIO OUT terminals.
Caution
External speakers cannot be connected directly to PROG.OUT terminals.
When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.
HDMI connections to some Panasonic equipment allow you to enjoy the easy playback or home theater.
Setup the equipment to enable this function. Read the manual of the equipment.
Switch the TV unit on again with the equipment on when connection or setup is changed.
This function may not work normally depending on the equipment condition.
The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
Data format for Card browsing
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association's standard
Created automatically
3-digit folder number + 5-digit arbitrary characters
4-digit arbitrary characters + 4-digit file number
Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and "_"
DIGITAL AUDIO OUT terminals
Control with HDMI "HDAVI Control"
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents