Advertisement
Quick Links
Access control
DG-101WI
DG-101BA
Standalone Keypad Access
•
Operating voltage 12~24Vdc
•
ABS plastic
•
Allows up to 49+50 PIN codes
•
Dual relays output for multi control
•
Fully programmable via keypad
and master code
•
5 digit codes only
•
3 LED displays with audible indication
40
0
#
S P E C I F I C AT I O N
•
Current draw: Pull in: 60mA/12Vdc; Holding: 15mA/12Vdc.
•
Output: Dual relays, N.O./N.C/Com.
•
Relays rating: 2A@30Vdc., 0.4A@120Vac.
58
Access control
WHITE
BLACK
70
Locking Device 1
(Fail-Safe)
114
Master Code
reset to
Factory 12345
12Vdc
+
Relay
Relay
Reset
1 2 3
•
Memory volume: 49+50 PIN codes.
Relay 1 is controlled by 001~049 user slots.
Relay 2 is controlled by 050~099 user slots.
12Vdc
+
Locking Device 2
(Fail-Secure)
Push Button 1
Black: N.O.2
Brown: Com.2
Red: N.C.2
Orange: P1
Yellow: B1
Green: P2
Blue: B2
Purple: Reed
Grey: Reed
Push Button 2
Contact door reed switch. This reed switch is used to
reset the re-locking time to 0 second when the door
is moved (relay 1). Using N.O. contact in case of door
closed, change over to N.C. when door is moved.
All dimensions in mm
Advertisement
Related Manuals for GEM DG-101WI
Summary of Contents for GEM DG-101WI
- Page 1 Access control DG-101WI WHITE DG-101BA BLACK Standalone Keypad Access • Operating voltage 12~24Vdc • ABS plastic • Allows up to 49+50 PIN codes • Dual relays output for multi control • Fully programmable via keypad and master code • 5 digit codes only •...
- Page 2 The DG-101 Digital Keyless Entry system Operation User's Manual This series of request to exit can be Surface mounting Installation: mounted directly in ANSI electrical box SMB-750 housing is optional for (Flush mount) surface mount. 1. Product Characteristic: Allows up to 49+50 PIN codes Dual relays programmable On/Off or pulsed or latched mode Fully Programmable via keypad and master code Door Reed Switch Input for Anti-Trailing...
- Page 3 3. The indicator signal chart: Sound and LED indicator: Green LED Power on, stand-by Red LED Relay 1 activated LED signal Yellow LED Relay 2 activated 1 Beep Effective PIN codes Entering 、Exiting from the Program mode 2 Beeps Sound signal Data computing error 、...
- Page 4 Changing the Master codes: Enter the Programming mode, Enter「＊000」Followed by the new 5 digit master code→（beep）→enrolled→Enter 「#」 to exit from the programming mode, or program other operating. Master Code reset to Factory 「12345」 Insert the jumper P1 2-3 position 5 audible beeps Reset successful Return Insert the jumper to 2-3 position.