Cannot Connect To Computer Properly - Canon PIXMA MX310 series Quick Start Manual

Canon office all-in-one quick start guide
Hide thumbs Also See for PIXMA MX310 series:
Table of Contents

Advertisement

Cause
Installation procedure not followed
correctly.

Cannot Connect to Computer Properly

Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work
Cause
Your system environment is not fully
compatible with USB 2.0 Hi-Speed.
"This device can perform faster" Message Is Displayed
Cause
Your system environment is not fully
compatible with USB 2.0 Hi-Speed.
Follow the procedure described in your setup sheet for proper installation.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart
your computer, and then reinstall the MP Drivers. Refer to the PC Printing Guide
on-screen manual.
Note
If the installer was forced to be terminated due to a Windows error, the system
may be in an unstable condition and you may not be able to install the MP
Drivers. Restart your computer before reinstalling.
If your system environment is not fully compatible with USB 2.0 Hi-Speed, the
machine will operate at a lower speed provided under USB 1.1. In this case, the
machine operates properly but printing speed may slow down due to
communication speed.
Check the following to ensure that your system environment supports USB 2.0
Hi-Speed connection.
The USB port on your computer supports USB 2.0 Hi-Speed connection.
The USB cable, and the USB hub if you are using one, support USB 2.0 Hi-
Speed connection.
Be sure to use a certified USB 2.0 Hi-Speed cable. We recommend the cable
to be no longer than around 10 feet / 3 meters.
The operating system of your computer supports USB 2.0 Hi-Speed
connection.
Obtain and install the latest update for your computer.
The USB 2.0 Hi-Speed driver operates properly.
Obtain the latest version of the USB 2.0 Hi-Speed driver compatible with your
hardware and install it on your computer.
Important
For details on USB 2.0 Hi-Speed of your system environment, contact the
manufacturer of your computer, USB cable, or USB hub.
Your system environment is not compatible with USB 2.0.
See "Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work" on
page 83.
Action
Action
Action
Troubleshooting
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents