Canon PIXMA MP470 Series Quick Start Manual page 22

2
Load the envelopes.
(1) Load the envelope against the right
side of the Rear Tray.
Load with the address side facing
UP and the rear flaps DOWN on
the left.
Up to 10 envelopes can be loaded
at once.
(2) Pinch the Paper Guide and slide it
against the left side of the
envelope.
(3) Set the Paper Thickness Lever to
the right.
Note
Reset the Paper Thickness Lever to the
left when you finish printing. For details on
the Paper Thickness Lever, refer to
"Inside" in "Main Components" of the
User's Guide on-screen manual.
3
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 29 or "Printing with
Macintosh" on page 30.
18 Before Using the Machine
®
, select DL Env. or Comm. Env. #10 in Page Size.
(2)
(3)
(A) Printing orientation
(B) Make sure the flaps are folded.
(B)
(1)
(A)