[Language] Menu - LG BH200 Owner's Manual

BH200-N_AUSALLK_ENG 4/18/08
[DISPLAY] Menu (Continued)
Video Mode
Select the video mode during play.
[Default]
cally. Qdeo delivers rich high-definition video
quality through a suite of advanced QuietVideo™
technologies. You cannot adjust other video
adjustment options.
[User] – You can make further adjustments for
video using [Video Adjustment],
[Color Adjustment], [White NR], [Block NR], and
[Mosquito NR] options.
Video Adjustment
You can adjust Contrast, Brightness, Sharpness or
Color.
1. Select [Video Adjustment] option then press
ENTER.
The menu for video adjustment will appear
2. Use v / V to select a desired option then use
b / B to adjust the value.
• Select [Default] option then press ENTER to
reset the video adjustment.
• Select [Close] option then press ENTER to exit
the [Video Adjustment] menu.
Color Adjustment
You can adjust picture's color.
1. Select [Color Adjustment] option then press
ENTER.
The menu for color adjustment will appear
2. Use v / V to select a desired option then use
b / B to adjust the value.
• Select [Default] option then press ENTER to
reset the color adjustment.
• Select [Close] option then press ENTER to exit
the [Color Adjustment] menu.
White NR (White Noise Reduction)
Enhance the video quality by reducing the white
(random) noise of the digital video.
The higher White NR level makes the video softer.
20
9:28 AM Page 20
– The video is adjusted automati-
Block NR (Block Noise Reduction)
Set to [On] to reduce the block noise, which may
appear especially on fast-moving pictures, produced
in the MPEG compression process.
Mosquito NR (Mosquito Noise Reduction)
Set to [On] to reduce the mosquito (scattering) noise
produced in the MPEG compression process.
Black Level
You can adjust the black level of the output signal.
[Off] – Normal black level. (7.5 IRE)
[On] – To display deeper, richer black than in
[Off] setting. (0 IRE)
Note:
Black Level control is only valid in component 480i
case.

[LANGUAGE] Menu

Display Menu
Select a language for the Setup menu and on-
screen display.
Disc Menu / Disc Audio / Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original] – Refers to the original language in
which the disc was recorded.
[Other] – To select another language, press
number buttons then ENTER to enter the corre-
sponding 4-digit number according to the lan-
guage code list on page 33.
[Off] (for Disc Subtitle) – Turn off Subtitle.
Note:
Depending on a disc, your language setting may not
be worked for some disc.