Resolution Setting - LG BH200 Owner's Manual

BH200-N_AUSALLK_ENG 4/18/08

Resolution Setting

The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks.
You can change the resolution using [Setup] menu
or pressing the RESOLUTION button in complete
stop mode.
Auto – If the HDMI OUT jack is connected for
TVs providing display information (EDID), auto-
matically selects the resolution best suited to the
connected TV (1080p, 1080i, 720p or 480p).
(only for HDMI connection)
1080p – Outputs 1080 lines of progressive
video. (only for HDMI connection)
1080i – Outputs 1080 lines of interlaced video.
720p – Outputs 720 lines of progressive video.
480p – Outputs 480 lines progressive video.
480i – Outputs 480 lines of interlaced video.
(only for COMPONENT VIDEO OUT connec-
tions)
How to change the resolution using
RESOLUTION button
Press RESOLUTION button in complete stop mode.
How to change the resolution using
Setup menu
1. Press HOME and the Home Menu appears.
2. Select [Setup] and press ENTER. The Setup
menu appears.
3. Use v / V to select [DISPLAY] option then press
B to move to the second level.
4. Use v / V to select the [Resolution] option then
press B to move to the third level.
5. Use v / V to select the desired resolution then
press ENTER to confirm your selection.
18
9:28 AM Page 18
RESOLUTION button
Available resolution according to
connection
HDMI OUT connection
• Auto, 1080p, 1080i, 720p and 480p are available.
• 480i is not available.
• If you select a resolution manually and then con-
nect the HDMI jack to TV and your TV does not
accept it, the resolution setting is set to [Auto].
• If you select a resolution that your TV does not
accept, the warning message appears for a while
then it disappear. You must select a resolution that
your TV does accept.
• The 1080p video output frame rate may be auto-
matically set to either 24Hz or 60Hz depending
both on the capability and preference of the con-
nected TV and based on the native video frame
rate of the content on the Blu-ray disc or HD DVD.
COMPONENT VIDEO OUT connection
• 1080i, 720p, 480p and 480i are available.
• The resolution may be limited depending on the
title in BD-ROM and HD DVD.
• If the disc is copy protected, the resolution will be
changed to 480p automatically.
• 1080p is not available.
VIDEO OUT connection
• The resolution of the VIDEO OUT jack is fixed to
480i.
• With Film Mode "On", composite video (yellow
video jack) is not active.
Notes:
• Depending on your display, some of the resolution
settings may result in the picture disappearing or
an abnormal picture appearing. In this case, press
STOP twice then RESOLUTION repeatedly until
the picture re-appears.
• This player supports simultaneous output of video
on its HDMI OUT and COMPONENT VIDEO OUT
jacks. The resolution on the HDMI output will be
the same as the resolution output on the compo-
nent video output. Thus, because the HDMI output
can change automatically to match the maximum
available resolution of your display when
[Resolution] option is set to [Auto] on the setup
menu, if you connect both the HDMI output and
component video output, the resolution on the
component video output will change if the HDMI
output Auto-adjusts.