LG MS690 Owner's Manual page 108

Safety
106
Battery usage by children should
G
be supervised.
Avoid dropping the phone or
G
battery. If the phone or battery is
dropped, especially on a hard
surface, and the user suspects
damage, take it to a service
center for inspection.
Improper battery use may result
G
in a fire, explosion or other
hazard.
For those host devices that utilize
G
a USB port as a charging source,
check the host device's user
manual for the USB-IF logo or
some other means to ensure that
it has completed the USB-IF
compliance program.
Charger and Adapter Safety
The charger and adapter are
G
intended for indoor use only.
Insert the battery pack charger
G
vertically into the wall power
socket.
Only use the approved battery
G
charger. Otherwise, you may
cause serious damage to your
phone.
Use the correct adapter for your
G
phone when using the battery
pack charger abroad.
Battery Information and Care
Please dispose of your battery
G
properly or take it to your local
wireless carrier for recycling.
The battery doesn't need to be
G
empty before recharging.
Use only LG-approved chargers
G
specific to your phone model
since they are designed to
maximize battery life.
Do not disassemble or short-
G
circuit the battery.
Keep the battery's metal contacts
G
clean.
Replace the battery when it no
G
longer provides acceptable
performance. The battery can be
recharged several hundred times
before replacement.
Recharge the battery after long
G
periods of non-use to maximize
battery life.
Battery life will vary due to usage
G
patterns and environmental
conditions.
Use of extended backlighting,
G
Browser, and data connectivity
kits affect battery life and talk/
standby times.
The self-protection function of the
G
battery cuts the power of the
phone when its operation is in an
abnormal state. In this case,
remove the battery from the
phone, reinstall it, and turn the
phone on.
Explosion, Shock, and Fire Hazards
Do not put your phone in a place
G
subject to excessive dust and
keep the minimum required
distance between the power cord
and heat sources.
Unplug the power cord prior to
G