LG F1402FDS6 Owner's Manual

Remove Packaging Electrical connection
1 4
1. Do not use an extension cord or double adapter.
• The appliance is fitted with transit bolts to prevent internal
2. Have damaged supply cords replaced by the manufacturer or its service agents or a similarly qualified person
damage during transport. Be careful, heavy load!
to prevent danger.
3. Always unplug the machine and turn off the water supply after use.
• Packing and all transit bolts must be removed before using
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
the washing machine.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexpe-
• When unpacking the base, be sure to remove the additional
rienced persons may cause injury or serious malfunctioning. Contact your local service centre.
packing support in the middle of the base packing.
• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst
under pressure. The electronic control unit may become unreliable at temperatures below freezing point.
i Store original packing for future move. • If the appliance is delivered in the winter months and temperatures are below freezing: Leave the washing machine
Dispose of packing material according to local regulations. standing at room temperature for a few hours before putting it into operation.
Green and
Yellow (Earth)
E
Brown(Live)
Fuse
Blue(Neutral) L
Transit bolts N
2 Cord
grip
Schraubenschlüssel
1 2 to the terminal marked with the letter N or coloured black. The wire coloured brown must be connected to the terminal
To prevent internal dama-
Remove the 4 bolts
marked with the letter L or coloured red. If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
ge during transport, the
along with the rubber
special 4 bolts are locked.
bungs by slightly
If they are not removed, it
twisting the bung.
may cause heavy vibrati-
Connecting water supply hose
on, noise and machine to 5
malfunction.
The hose supplied with the machine must be used. Old hoses may not be reused
3 4
Close the holes with
Unscrew the 4 bolts
3. Die 4 Schrauben lösen und die
using the spanner the caps supplied.
Gummipfropfen etwas drehen, um sie
supplied.
zusammen mit den Schrauben abzunehmen.
Die 4 Schrauben und den Schraubenschlüssel
für späteren Gebrauch aufbewahren.
• Die Transportsicherungsschrauben müssen vor
i
Keep the 4 bolts and the spanner for the future use. Refit transit bolts before transporting the appliance.
jedem Transport des Geräts wieder angebracht
werden.
Requirements for installation site
3
4. Die Schraubenbohrungen mit den
beiliegenden Kappen verschließen.
Level floor: Permissible floor gradient under entire washing machine
is 1˚ .
5
Power socket: Must be within 100 cm of either side of location of
washing machine. Do not overload the socket with more than one
appliance.
Additional Clearance: For wall, floor and door space is needed.
i
If after completing connection water leaks from the hose, repeat the same steps. Use the most conventional
(10cm: rear / 2cm:right & left side). Do not place or store laundry pro-
type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting
ducts on top of the washing machine at any times. They can damage
the tap into the adaptor.
the finish or controls of the machine.
6 Installation of drain hose
BS Plug Safety Details (For U.K. User)
This appliance must be earthed As the colours of the wires in the mains lead
of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows: The green and yellow wire must
be connected to the terminal in the plug marked E or by the earth symbol or
coloured green or green and yellow. The wire coloured blue must be connected
• The drain hose should not be placed higher than 100 cm above the floor.
Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)
Don't strip or crossthread when connecting inlet hose to the valve. • Proper securing of the drain hose will protect the floor from damage due to any water leakage.
If the water supply pressure is more than 1000kPa, a decompression • If the drain hose is too long do not force back into the washing machine. This will cause unusual noise.
device should be installed.
• Two rubber seals are supplied with the water inlet
hoses. They are used for preventing water leaks.
Level adjustment
7
• Make sure the connection to taps is tight enough.
• Periodically check the condition of the hose and
replace the hose if necessary.
• Proper level-adjustment of the washing ma-
• Make sure that there is no kink on the hose and
chine prevents excessive noise and vibration.
that it is not crushed.
Install the appliance on a solid and level floor
When your washing machine has two valves: surface, preferably in a corner of the room.
• The inlet hose with the red connector is for the hot
• If the floor is uneven, adjust feet as required.
water tap.
(Do not insert pieces of wood etc. under the
• If the washing machine has two valves, power feet). Make sure that all four feet are stable
saving is achieved through using hot valve. and resting on the floor. Then check that
the appliance is perfectly level. (Use a spirit
level).
Adjustable feet
Safety instructions for use
Safety instuctions for the installation
Read all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operating
Install or store appliance where it will not be exposed to sub-zero temperatures or exposed to the weather. Fit ground of the
instructions handy for later use. If the appliance is sold or passed on then ensure that the new owner always receives these
washing machine correctly to conform with all statutory regulations and ordinances. Ensure that the base opening is free from
operating instructions. The following warnings must be strictly observed for safety reasons. They must be read before instal-
obstruction by carpeting if the washing machine is installed on a carpeted floor. In countries where there is a risk of cockroach
ling the appliance and putting it into operation.
infestation or other vermin, pay particular attention to keep the appliance and its surroundings in a clean condition at all times.
Any damage which may be caused by cockroaches or other vermin is not covered by the appliance guarantee.
• Intended use: This appliance has been designed exclusively for use in dry-interior households. Use the appliance only with cold
drinking water and only for washing textiles with washing detergents designed for washing machines. Every other use is improper and
CAUTION about positioning the appliance
may lead to injuries, whereby the liability of the manufacturer will cease.
Install the washing machine on a flat hard floor. Make sure that air circulation around the washing machine is • This appliance may only be used by adults. Do not allow children to touch the controls or to play with the product.
not impeded by carpets, rug etc.
• Never modify the appliance on your own, as this is dangerous.
• Never try to correct any unevenness in the floor using pieces of wood, cardboard or similar materials under the washing machine. • This appliance is heavy. Transporting with care.
• If it is not possible to position the washing machine away from a gas cooker or coal burning stove, an insulation panel • Remove all packaging and transport bolts before using the appliance. Otherwise serious damage may result.
(85x60cm) covered with aluminum foil on the side facing the cooker or stove, must be inserted between the two appliances. • All installation work must be carried out by a qualified fitter or technician.
• The washing machine must not be installed in rooms where the temperature may drop below 0°C. • Have electrical connections done by a qualified electrician.
• Please ensure that when the washing machine is installed an engineer can gain easy access in the event of a breakdown.
• Never place the appliance on the power cord.
• Adjust all four feet using the transit bolt spanner provided to ensure that the appliance is stable, with 20mm clearnace between
• If the appliance is placed on a carpet then place the feet so that air can circulate underneath the appliance.
the top of the washing machine and underside of the worktop.
• Always unplug the machine and turn off the water supply after use. Disconnect appliance by pulling only the plug - never disconnect
by pulling the power cord. Never touch the plug with wet fingers or hands.
CAUTION about the power cord
• Do not overload the appliance.
We recommend connecting most appliances to a dedicated circuit. That is, a single outlet supplying power only to the appliance • Wash only machine-washable textiles. If you have doubts regarding this, then observe the markings on the label.
concerned, without any additional outlets or branch circuits. Check the specifications of this owner's manual. Do not overload • Never place electrical heaters, candles etc. in the vicinity of the appliance. They could cause the appliance to ignite or parts to warp.
wall sockets. Overloaded wall sockets, loose or damaged wall sockets or extension cords, frayed power cords, damaged or
• Protect the appliance from wet and damp. Otherwise, there is danger of electric shock and fire.
cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the
• Connect the appliance to a suitable wall socket for 220-240V. Never use an extension cord or double adapter.
cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance,
• Empty all pockets. Hard or sharp objects such as coins, needles, nails, screws or stones may cause serious damage.
and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
Unbalanced mass may create heavy vibrations. If heavy vibrations remain also without load, call for an authorized customer service.
mechanical abuse, such as being twisted, kinked, pinched, squashed in a jamb of a door, or walked upon. Pay particular atten-
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances
tion to plugs, wall outlets, and the point where the cord exits the appliance. We recommend to use a residual current operated
device in the mains supply. (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in fire or explosion.
• Never insert products coated with mineral oils (e.g. nylon coating, plastic belts, etc. ) into the machine. If a stain remover has been
used then make sure that the solvent has been carefully washed out before inserting the clothes into the appliance. Oil may remain in
CAUTION about location and moving
the tub after a whole cycle resulting in fire during drying. So, do not load oily clothes.
This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stop- • Do not operate the appliance at locations where flammable substances are present such as oil, benzene or highly inflammable gas.
cock if the machine is to be left for any length of time (e.g. if you are going on holiday), especially if there is no floor drain (gully) Such materials may cause fire or explosion. Never use combustible detergents.
in the immediate vicinity. If relocating the appliance use the original packing material. Disable the door lock to prevent young • Only add the prescribed amount of softener. Excessive amounts may damage the clothes.
children becoming trapped inside. Packaging material (e.g. plastic film, Styrofoam) can be dangerous for children. There is a risk
• After washing, keep the drum door open to protect the door seal.
of suffocation! Keep all packaging well away from children.
• Make sure that all water has run off before opening the door. Never open the door if water still remains. Danger of scalding.
• Animals and children may get into the washing machine. So always check the appliance before using it.
CAUTION about the floor surface
• During washing, the glass door becomes very hot. Keep children away from the appliance when in operation.
• Never try to repair the machine yourself. Incorrect repairs may result in injuries and/or serious defects to the machine.
• The installation surface must be clean, dry and level.
• Install washing machine on a flat hard floor. • The product should be serviced and repaired only by the authorised customer service using original replacement parts.
• Proper placement and levelling of the washing machine ensure long, regular and reliable operation. • When disposing of your old machine, the power cable must be capped and the door lock must be made unusable in order to protect children.
• The washing machine must be perfectly level and firmly in position.
• When placing on a carpeted floor, make sure that the opening in the socket is not blocked.
• It must not "see-saw" across corners under load.
• If the appliance has been under water then contact the customer service. There is danger of electric shock and fire.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• The cover cup of the filter as well as the dispenser drawer may not be opened during the operation.
• Do not allow the feet of the washing machine to get wet. If feet of the washing machine get wet, slipping may occur.
• Keep all washing powder and detergents away from children. Danger of poisoning
G arantiebedingungen
@ Technical Specification
Disposal • When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
Entsorgung von Altgeräten by European Directive 2002/96/EC.
1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers • All electrical and electronic products should be disposed of separately from municipal waste stream
Name of product Front loading washing machine Max. Watt 2100 W (Wash) / 1100 W (Steam) auf einem Produkt angebracht ist, unterliegt dieses Produkt
via designated collection facilities appointed by the government or the local authorities.
der europäischen Richtlinie 2002/96/EC.
2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom
Power supply 220-240 V~, 50 Hz Wash capacity 9 kg • The correct disposal of your old appliance will help prevent potential adverse consequences for the
Hausmüll über dafür staatlich vorgesehenen Stellen entsorgt
werden. environment and human health.
Size WxDxH mm: 600 x 640 x 850 Water consumption 59 l (6.5l / kg) 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts
• For more detailed information about disposal of your old appliance, please contact your city office, vermeiden Sie Umweltschäden und eine Gefährdung der
persönlichen Gesundheit.
Weight 65 kg Permissible water pressure 1.0-10 bar (100-1000kPa) waste disposal service or the shop where you purchased the product.
4. Weitere Informationen zur Entsorgung des alten Geräts
erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt
oder in dem Geschäft, wo Sie das Produkt erworben haben.
N Troubleshooting
S y m p o t m P o s s b i e l C a u e s S l o t u o i n
• Water supply is not adequate in area Check another tap in the house.
• Water supply taps are not completely open. Fully open tap.
• Water inlet hose(s) are kinked. Straighten hose(s).
• The filter of the inlet hose(s) are clogged. Check the filter of the inlet hose(s).
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
Clean the drain filter.
• The drain filter is clogged.
For more detailed information,
please refer to "Cleaning the drain pump filter"
• Load is too small. Add 1 or 2 similar items to help
• Load is out of balance. balance the load.
• The appliance has an unbalance detection
Rearrange load to allow proper
and correction system. If individual heavy spinning
articles are loaded (ex. bath mat, both robe,
etc.), this system may stop spinning or even
interrupt the spin cycle altogether.
• If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
• Is the door opened or not
Close the door completely.
completely closed?
If " " is not released, call for service.
tE
Unplug the power plug and call for service.
FE • Water overfills due to the faulty water
Close the water tap.
valve.
Unplug the power plug.
Call for service.
PE
• Water level sensor has malfunctioned.
LE
• Over load in motor.
AE
• Water leaks
Call for service.
PF
• The washer experienced a power failure.
Restart the cycle.
Rattling and clanking noise Extraneous objects such as coins or safety pins maybe in drum or pump.
Thumping sound Heavy wash loads may produce a thumping sound. This is usually normal.
Vibrating noise
Have all transit bolts and packing been removed?
Water leaks. Check and tighten hose connections. Unclog drain pipe.
Contact plumber if necessary.
Excessive suds Too much detergent or unsuitable detergent.
Please read this owner's manual carefully, it provides instructions on safe installation, use and maintenance.
Washing machine does not start Power cord may not be plugged in or connection may be loose.
Keep it handy for future reference of this machine. Make a note of the model and serial numbers of your washing machine.
Washing machine won't spin Check that the door is firmly shut.
Door does not open Once started, the door can not be opened for safety reasons.
Wait one or two minutes before opening the door to allow the electric
CUSTOMER SERVICES Tel. : 0870 - 873 - LGLG (5454) Fax. : 0870 - 872 - 7337
locking mechanism time to release.
Owner's Manual
F1402FDS(1~9)
Before use please read carefully the safety instructions!
Thank you for buying an LG fully automatic washing machine.
For the U.K. customer
LGEUK SERVICE WEB-SITE : http://uk.lge.com
P/No. :MFL38868793