Canon JX510P User Manual page 76

Cause
The Rear Tray may contain too many
sheets.
Different types of paper may be loaded
in the Rear Tray.
Repeated Paper Jams Occur
Cause
The paper you are using may be
causing the jams.
Faxing Problems
Sending Problems
You Cannot Send a Document
Cause
The FINE Cartridge may not be
installed properly.
The fax may have overheated.
The fax may not be set for the type of
telephone line in use (pulse/tone).
The document may not have been
loaded correctly into the ADF.
The one-touch speed dialing button or
coded speed dialing code you entered
may not be registered for the feature
you want to use.
You may have dialed or have been
provided with an incorrect number.
The receiving party's fax machine may
be out of paper.
There may be other documents being
sent from memory.
An error may have occurred during
sending.
The telephone line may not be working
properly.
The receiving fax machine may not be
a G3 fax machine.
74 Troubleshooting
Make sure the paper stack in the Rear Tray does not exceed the paper limit
mark ( ) (see page 21).
Do not exceed the maximum loading capacity of the Rear Tray (see
page 92).
Do not force the paper stack into the Rear Tray.
Load only one type of paper.
Make sure you load paper that meets the paper requirements for the fax (see
page 20).
Be sure to tap the stack on a flat surface before loading it in the Rear Tray.
This keeps the sheets of paper from sticking together.
Check that the paper you are using and your printing environment are within
the specifications of the fax (see page 20, page 92).
Try loading a fresh stack of paper in the Rear Tray.
Make sure the FINE Cartridge is installed properly. Do not remove a used FINE
Cartridge except to replace it with a new one.
Unplug the fax and let it cool for several minutes. Then plug it back in and try
sending again.
Make sure the fax is set for the correct telephone line type (see page 14).
Remove the document, stack it if necessary, and load it into the ADF
correctly (see page 21).
Make sure the Cover is closed.
Check the one-touch speed dialing button or coded speed dialing code and
make sure it is registered correctly (see page 17).
Dial the number again, or check that you have the correct number.
Call the receiving party and ask them to make sure paper is loaded in their fax
machine.
Allow time for those documents to finish sending.
Print the ACTIVITY REPORT and check for an error (see page 60).
Make sure there is a dial tone when you press [Hook] or when you lift the
Handset. If there is no dial tone, contact your local telephone company.
Make sure the receiving fax machine is compatible with this fax machine (which
is a G3 fax machine).
Action
Action
Action