Sign in today to find solutions:

Don't have an account? Sign up

Canon FAX JX210P User's Manual

Canon inkjet fax machine user guide.

 

Summary of Contents

  • Page 1

    User’s Guide Table of Contents Introduction Before Using Your Machine Copying Sending Faxes Receiving Faxes Printing from Your Computer Settings and Activity Reports Routine Maintenance Troubleshooting Specifications Appendix...

  • Page 2

    Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has stopped. International ENERGY STAR As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY STAR guidelines for efficiency. Depending on your application program, operations may differ. For details, refer to the instruction manual of your application.

  • Page 3: Introduction

    Introduction Useful Information Replacing a FINE Cartridge When the ink in the FINE Cartridge starts to run out, the machine will switch to memory reception of faxes. See “Printing a Document in Memory” on page 39 See “Replacing a FINE Cartridge” on page 52 See “Aligning the FINE Cartridge”...

  • Page 4

    Reading the Documentation This guide provides detailed information on how to set up, operate, maintain, and troubleshoot your fax. Please read the list below to become familiar with the symbols, terms, and abbreviations used in this guide. Warning Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly.

  • Page 5

    Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. Warning This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.

  • Page 6

    Caution You may cause injury or damage the machine if you ignore any of these safety precautions. Choosing a location Do not install the machine in a location that is unstable or subject to excessive vibration. Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.

  • Page 7

    How to Use the Documentation Provided Setup Sheet Be sure to read this sheet first. This sheet includes instructions for setting up your machine and getting it ready for use. User’s Guide (This guide) Read this guide when starting to use the machine. After following instructions in your setup sheet, we recommend you read this guide to familiarize yourself with the basic operation of some of the main functions that can be performed on your machine.

  • Page 8

    Prepare the FINE Cartridge. Caution Do not touch internal parts other than the Holder. Do not drop or shake FINE Cartridge as this may cause the ink to leak out and stain your clothes and hands. Important Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it.

  • Page 9

    Selecting the Language for the LCD If an unintended language is displayed on the LCD, change it into your desired language following the procedure below. Press [Menu]. Press [}] once, then press [Start/Copy]. Press [}] five times, then press [Start/Copy]. Press [}] twice, then press [Start/Copy].

  • Page 10

    We would appreciate it if you would take part in the Extended Survey Program regarding the use of Canon printers. If Do not agree is clicked, the Extended Survey Program will not be installed but you can use the machine normally.

  • Page 11: Before Using Your Machine

    Before Using Your Machine Main Components and Their Functions (10) (1) Document Cover (2) Paper Support (3) Rear Tray (4) ADF (5) Document Guide (6) Paper Guide (7) Handset (8) Operation Panel (9) Cover (10) Holder Before Using Your Machine (11) External Device Jack (12) Telephone Line Jack (13) USB Port...

  • Page 12

    Operation Panel (10) (11) (12) (1) [Maintenance] (see page 50) (2) [ON] (see page 12) (3) [Receive Mode/Resolution] (see page 23, page 25, page 34) (4) [Menu] (see page 14) (5) Ink Lamp (see page 50) (6) [Caller History] (see page 28) (7) LCD (Liquid Crystal Display) (8) [Coded] (see page 19) (9) [Redial] (see page 29)

  • Page 13

    Turning the Machine ON and OFF Turn on the machine before using. Turning on the Machine Before turning on the machine, confirm that the FINE Cartridge is set into place. Note If preparatory operations are not yet finished, follow your setup sheet to complete them. To turn on the machine, press [ON].

  • Page 14

    Guidelines for Entering Numbers, Letters, and Symbols When you come to a step that requires you to enter a name or number, see the table below to determine which numeric button to press for the letter you want. Button Uppercase Letter Mode (:A) PQRS WXYZ...

  • Page 15

    To delete a character: Use [[] or []] to move the cursor under the incorrect letter. Then press [Space]. To delete an entire entry: Press [Clear]. Continue entering other letters or numbers using the numeric buttons. When you have finished entering characters, press [Start/Copy] to register the entry.

  • Page 16

    Registering Sender Information You can register sender information (Transmit Terminal Identification (TTI)) in your machine so that your name, your fax/telephone number, and the date and time of transmission are printed in small type at the top of each page to be received. Thus, whenever you send a fax from this machine, the recipient receiving the fax knows who sent it, and when it was sent.

  • Page 17

    You can enter a space to make your number easier to read. TEL= 123 xxxx Enter your name (up to 24 letters) using the numeric buttons, then press [Start/ Copy] (see page 13). CANON Press [Stop/Reset]. Registration ends and the fax returns to standby mode. Before Using Your Machine...

  • Page 18

    Setting Daylight Saving Time (Summer Time) Some countries/regions adopt the daylight saving time (summer time) system that shifts the clock time forward or back at certain periods of the year. You can set your machine to automatically change the time by registering the day and time that daylight saving time (summer time) begins and ends.

  • Page 19

    TEL=250xxx_ Enter the party’s name (up to 16 letters) using the numeric buttons, then press [Start/Copy] to register the name (see page 13). CANON Note To delete the name and number registered under the one-touch speed dialing button, press [Clear] and [Start/Copy] after you perform steps 1 to 4.

  • Page 20

    Registering Coded Speed Dialing Numbers and Names Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone number can be registered under each two-digit speed dialing code and you can register up to 60 locations. You can also register the name of the party the name appears on the printout of the CODED SPEED DIAL TELEPHONE NO.

  • Page 21

    Document Requirements Types of Document You Can Scan Scanned Area The actual area scanned by the fax is shown below. LTR/LGL 0.08 ±0.14 in. 0.08 ±0.14 in. (2.0 ±3.5 mm) (2.0 ±3.5 mm) Problem Documents To prevent document jams in the ADF, do not attempt to load the following types of documents into the fax: - Wrinkled or creased paper - Torn paper...

  • Page 22

    Paper Requirements Your fax supports A4-, letter-, and legal-size paper in portrait orientation. You can use regular copier paper, cotton bond paper, or typical letterhead. Your fax does not require special ink jet paper. Always use paper without curls, folds, staples, or damaged edges. Look at the label on the package to see if the paper has a preferred side for printing.

  • Page 23

    Loading Documents and Paper Open the Document Cover (1) and extend the Paper Support (2) to support the paper. Squeeze, then slide the Paper Guide to the left. Insert the stack face up into the Rear Tray (1), and align the right edge of the stack with the right side of the Rear Tray.

  • Page 24: Copying

    Copying Making Copies One of the convenient features of the fax is its ability to make high quality copies. You can make up to 99 copies of one document at a time. If you make copies of multiple documents at a time, the number of pages the fax can scan into memory is as follows: <COPY STANDARD>/<COPY FINE>/<COPY DRAFT>...

  • Page 25: Sending Faxes

    If paper jams, see “Troubleshooting” on page 60. You can send up to 20 A4- and letter-size (10 legal-size) pages at a time (based on the Canon FAX Standard Chart No.1, standard resolution). You cannot add pages while the fax is sending.

  • Page 26

    If a person answers, converse normally, then ask them to press the start button on their fax. Press [Start/Copy] and hang up. If you hear a high pitch tone, press [Start/Copy] and hang up. Note If you pressed [Hook] in step 2, you need to pick up the Handset when a person answers the phone.

  • Page 27

    You can set the scanning resolution and the contrast (see page 25). Press the one-touch speed dialing button under which the number you wish to fax is registered. 01=CANON -or- Press [Coded] and enter the appropriate two-digit coded speed dialing code.

  • Page 28

    Press [Directory]. Press a numeric button to enter the first letter of the name of the party you are searching for. 01=Canon CANADA Press [{] or [}] to display the other names and numbers registered for the button letter group.

  • Page 29

    To enter a pause, press [Pause]. The length of this pause can be adjusted. See <PAUSE TIME> on page 46. A pause at the end of a number is fixed at 10 seconds. Sending Faxes CANON 01/25/2009 13:30...

  • Page 30

    Redialing When the Line is Busy There are two methods of redialing: manual redialing and automatic redialing. This section explains these two methods. Manual Redialing Press [Redial] to dial the last number you dialed with the numeric buttons*. (This starts redialing regardless of whether automatic redialing is enabled.) *This setting is only available when you dialed with the numeric buttons.

  • Page 31

    Use [{] or [}] to select <AUTO REDIAL>, then press [Start/Copy]. The LCD displays <ON>. To disable automatic redialing, use [{] or [}] to select <OFF>, then press [Start/Copy]. Press [Stop/Reset] to return to standby mode. To enable automatic redialing, use [{] or [}] to select <ON> and continue with the steps below.

  • Page 32

    Press [Start/Copy]. Press [Start/Copy] when using directory dialing. The fax scans the document into memory. Note If <MEMORY FULL> appears on the LCD during scanning, delete unnecessary documents from the memory (see page 40), then rescan your fax. The fax will automatically dial at the programmed time. Sending Other Documents While the Fax is Set for Delayed Sending You can send, receive, and copy other documents even when the fax is set for sending at a preset time.

  • Page 33

    Sequential Broadcasting Sending a Document to More Than One Location Sequential broadcasting sends one document to more than one location. You can send to a total of 70 locations as follows: One-touch speed dialing Coded speed dialing Regular dialing (Numeric buttons dialing) You can enter the one-touch speed dialing and coded speed dialing locations in any order.

  • Page 34: Receiving Faxes

    Receiving Faxes Different ways to receive a document Your fax provides you with several modes for receiving documents. To determine which mode best suits your requirements, see the table below. <Fax/Tel Mode>/<DRPD> RECEIVE INCOMING CALL ... INCOMING CALL ... Pick up the Handset to answer the call.

  • Page 35

    Setting the Receive Mode Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive Mode/Resolution]. Press [Receive Mode/Resolution]. Every time you press [Receive Mode/Resolution], the mode changes cyclically. Receiving Faxes: <FAX ONLY MODE> Note If paper jams, see “Troubleshooting”...

  • Page 36

    Use [{] or [}] to select <RECEIVE> or <DISCONNECT>, then press [Start/Copy]. This setting tells the fax what to do if the Handset is not picked up within the specified ring time set in step 6. Press [Stop/Reset]. Setting ends and the fax returns to standby mode. Receiving Documents Manually: <MANUAL MODE>...

  • Page 37

    Receiving with a DRPD (Distinctive Ring Pattern Detection) service: <DRPD> DRPD service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s) using only one telephone line.

  • Page 38

    Use [{] or [}] to select <INK SAVER>, then press [Start/Copy]. Use [{] or [}] to select <ON> or <OFF>, then press [Start/Copy]. Press [Stop/Reset]. Setting ends and the fax returns to standby mode. Receiving to Memory Temporarily You can enable/disable memory receiving feature temporarily by selecting <AUTO PRINT> when [Menu] is pressed.

  • Page 39

    Changing Receiving Volume of Handset Press [Menu]. Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. Use [{] or [}] to select <USER SETTINGS>, then press [Start/Copy]. Use [{] or [}] to select <VOLUME CONTROL>, then press [Start/Copy]. Use [{] or [}] to select <HANDSET VOLUME>, then press [Start/Copy].

  • Page 40

    Setting Caller ID If the <CALLER ID> setting is set to <ON>, the caller’s name and phone/fax number appear on the LCD when you receive a call. Note To use this feature, you will need to subscribe for a caller ID service. The <CALLER ID> feature uses the Telcordia or the ETSI EN 300 778-1 protocol.

  • Page 41

    Use [{] or [}] to select the transaction number (<TX/RX NO. you want to print, then press [Start/Copy]. The LCD toggles between <1ST PAGE ONLY?> and <YES=( ) NO=(#)>. If you are unsure of the transaction number (<TX/RX NO.>), print the MEMORY LIST (see page 39).

  • Page 42

    Deleting All Printed Documents from Memory Press [Menu]. Use [{] or [}] to select <MEMORY REFERENCE>, then press [Start/Copy]. Use [{] or [}] to select <DEL. PRINTED RX>, then press [Start/Copy]. The LCD displays <YES=( ) NO=(#)>. Press [ ] to delete all printed documents. If you want to keep the documents in memory, press [#].

  • Page 43: Printing From Your Computer

    Printing from Your Computer Printing from Your Computer This section describes procedure for basic printing. Important Before printing from your computer, install the printer driver to the computer to connect the machine and the computer. Refer to your setup sheet or “Installing the Printer Driver” on page 9. Note Only plain paper can be used for this machine.

  • Page 44

    You can view the On-screen Manual in the following way: To view the On-screen Manual, double-click the XXX On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon XXX Manual > XXX On-screen Manual (where “XXX” is your machine’s name).

  • Page 45: Settings And Activity Reports

    Settings and Activity Reports Selecting a Menu The <USER SETTINGS>, <REPORT SETTINGS>, <TX SETTINGS>, <RX SETTINGS>, <PRINTER SETTINGS>, <SYSTEM SETTINGS>, and <CALLER ID> menus allow you to customize the way your fax works. Each menu contains settings that control different functions of your fax. Press [Menu].

  • Page 46

    USER SETTINGS Name DATE & TIME Set the date and time (24-hour clock) using the numeric buttons. UNIT TELEPHONE # Enter your fax number using the numeric buttons. UNIT NAME This is the name that appears at the top of each fax page you send (see page 15).

  • Page 47

    Name ACTIVITY REPORT Enable/disable automatic printing of the ACTIVITY REPORT. AUTO PRINT When you set ON, your fax is set to print the ACTIVITY REPORT for every 20 transactions (sending and receiving). TX/RX SEPARATE Divide the activity management report into sent and received transactions.

  • Page 48

    PRINTER SETTINGS Name RX REDUCTION Enable/disable reduction for received documents. REDUCE DIMENSION Select reduction in height only or both width and height. PAPER SIZE Select the size of the loaded fax paper. INK SAVER Set the ink saver mode. AUTO PRINT Set whether to print received faxes, ACTIVITY REPORT, TX REPORT, RX REPORT, MULTI TX REPORT and MEMORY CLEAR REPORT automatically.

  • Page 49

    Name DAYLGHT SAV TIME Enable/disable the summer time system. START DATE/TIME Set the beginning of the summer time period. END DATE/TIME Set the end of the summer time period. MONTH: Set the beginning/end month. WEEK: Set the beginning/end week. DAY: Set the beginning/end day of the week. TIME: Set the beginning/end time.

  • Page 50

    ACTIVITY REPORT Summarizes the information for the sending and receiving activities of your fax after 20 transactions. For automatic printing, see <ACTIVITY REPORT> on page 46. Transactions in the ACTIVITY REPORT are listed chronologically. ONE-TOUCH SPEED DIAL TELEPHONE NO. LIST Lists the numbers and names registered under one-touch speed dialing buttons.

  • Page 51: Routine Maintenance

    Routine Maintenance Maintenance Menus The table below shows the available maintenance menus when you press [Maintenance]. Menus <CS CLEANING> (see page 57) <NOZZLE CHECK> (see page 53) <CLEANING> (see page 54) <DEEP CLEANING> (see page 54) <ALIGN PRINT HEAD> (see page 55) <HEAD ALIGN VALUE>...

  • Page 52

    Note The resulting print quality may not be satisfactory, if printing is continued under this condition. When the ink level is low, the print quality may become poor, and the machine will start storing incoming fax data in the memory. The FAX cannot detect whether or not the received data are clearly printed on the paper.

  • Page 53

    However, the error detection function is disabled after the error indication is canceled, therefore, Low Ink Warning message does not appear later on. When you install a new FINE Cartridge, the Low Ink Warning is enabled automatically. Replacing a FINE Cartridge Note Do not replace the FINE Cartridge while the fax is printing or performing another operation.

  • Page 54

    (We recommend that you note the date that the FINE Cartridge was installed in the machine). Releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition. Note Load the paper in the Rear Tray before you replace the FINE Cartridge.

  • Page 55

    Use [{] or [}] to select <NOZZLE CHECK>, then press [Start/Copy]. The fax prints the nozzle check pattern. If the pattern is broken or missing (1), clean the FINE Cartridge print head (see page 54). FINE Cartridge Cleaning If the pattern is broken or missing, clean the FINE Cartridge print head. Note Cleaning the print head consumes a small amount of ink.

  • Page 56

    Use [{] or [}] to select <DEEP CLEANING>, then press [Start/Copy]. Note After cleaning, print the nozzle check pattern to check if cleaning corrected the problem (see page 53). If cleaning does not improve print quality, replace the FINE Cartridge (see page 52). Aligning the FINE Cartridge If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head position.

  • Page 57

    (2) Repeat the procedure to input inputting the pattern number for columns B and C. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (A) Less noticeable white streaks (B) More noticeable white streaks (3) When you have finished inputting all pattern numbers, the fax returns to standby mode.

  • Page 58

    Open the Cover. Caution Do not touch the metallic parts or other parts inside the machine. Use a clean, soft, dry, lint-free cloth to remove any ink or paper debris from the interior of the fax, especially around the four pinch rollers (A).

  • Page 59

    Cleaning the Roller Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary. Ensure that the machine is turned on and there is no paper loaded in the Rear Tray. Press [Maintenance].

  • Page 60

    Cleaning the Protrusions Inside the Machine If protrusions inside the machine are stained, wipe ink off the protrusions using a swab or something similar. Caution Always unplug the machine from the power outlet before cleaning the machine. If you accidentally switch the machine on while cleaning it, you could injure yourself.

  • Page 61: Troubleshooting

    Troubleshooting Paper Jams Jams in the ADF When a document jams or misfeeds in the ADF, either both <OPEN COVER> and <SEE FIG. 1> or only <CHK PRINTER 5100>/<SEE MANUAL> are displayed on the LCD. Note You do not need to unplug the fax when clearing document jams. When <OPEN COVER>...

  • Page 62

    Open the Cover. Gently remove the jammed paper inside the fax. Press [Stop/Reset]. The fax returns to standby mode. If the Power Disconnects Unexpectedly The date and time setting on your device will be kept. All documents stored in memory will be deleted.

  • Page 63

    Cause Different types of paper may be loaded in the Rear Tray. Repeated Paper Jams Occur Cause The paper you are using may be causing the jams. Faxing Problems Sending Problems You Cannot Send a Document Cause The FINE Cartridge may not be installed properly.

  • Page 64

    Cause The document may not have been loaded correctly into the ADF. Cannot Send Using Error Correction Mode (ECM) Cause The receiving party’s fax machine may not support ECM. ECM may be disabled. Errors Occur Frequently While Sending Cause The telephone lines may be in poor condition, or you may have a bad connection.

  • Page 65

    Cannot Receive a Document Manually Cause You may have disconnected the call by pressing [Start/Copy] or dialing the remote receiving ID after hanging up. The remote receiving ID may be incorrect. Print Quality is Poor Cause You may not be using the correct type of paper.

  • Page 66

    Errors Occur Frequently While Receiving Cause The telephone lines may be in poor condition, or you may have a bad connection. The sending fax machine may not be functioning properly. Copying Problems The Fax Does Not Make a Copy Cause The FINE Cartridge may need to be replaced.

  • Page 67

    Telephone Problems You Cannot Dial Cause The telephone line may not be connected properly. The power cord may not be plugged in securely. The machine may not be switched on. The fax may not be set for the type of telephone line in use (pulse/tone).

  • Page 68

    PC Printing Problems If an Error Occurs When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. The message may vary depending on the version of your operating system. Cannot Install the Printer Driver Cause The installer is not compatible with your...

  • Page 69

    Cannot Connect to Computer Properly Printing or Scanning Speed Is Slow / Hi-Speed USB Connection Does Not Work / “This device can perform faster” Message Is Displayed Cause Your system environment is not fully compatible with Hi-Speed USB. Print Results Not Satisfactory If the print result is not satisfactory due to misaligned lines, confirm the paper and print quality settings first.

  • Page 70

    Lines Are Misaligned Cause The paper and print quality settings are not set properly. Print Head is misaligned. Size of the print data is extremely large. Click Print Options on the Page Setup sheet. Then, select the Prevent loss of The Printing layout printing or Binding margin function is being used.

  • Page 71

    (3)Right-click the Canon XXX icon, then select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (where “n” is a number) with Canon XXX appearing in the Printer column is selected for Print to the following port(s).

  • Page 72

    Printing Stops Before It Is Completed Cause Printing documents with plenty of photographs or illustrations. The machine has been printing continuously over a long period. Paper may not be loaded correctly. Printing Speed Not as Fast as Expected Note Printing speed may not improve noticeably by following the instructions below, depending on your system environment.

  • Page 73

    If you agree to participate in the survey program: Click Agree, then follow the on-screen instructions. The machine usage information will be sent to Canon via the Internet. Note When sending the information, the caution screen such as an Internet security screen may be displayed.

  • Page 74

    In Case of a Power Failure The user data settings and registered data for one-touch speed dialing and coded speed dialing are saved during a power failure. However, documents stored in the fax memory will be deleted and redial data in the extension phone memory may be lost.

  • Page 75

    BUSY/NO SIGNAL Cause The telephone number you dialed is busy. The fax number dialed was incorrect. The other party’s fax machine is not working. The other party is not using a G3 machine. The fax may not be set for the type of telephone line in use (pulse/tone).

  • Page 76

    CHK PRINTER B200 / REQUIRE SERVICE Cause An error requiring servicing might have occurred. CHK PRINTER nnnn / SEE MANUAL Cause An error requiring servicing might have occurred. CLEAR PAPER JAM Cause There is a paper jam. DOC. TOO LONG Cause The document is longer than 15.8 in.

  • Page 77

    MEMORY FULL Cause The fax’s memory is full because it has received too many documents, or a very long or detailed document. The fax’s memory is full because you either tried to send or copy too many pages at once, or you tried to send or copy a very long or detailed document, using memory sending.

  • Page 78

    TX/RX NO. nnnn Cause When the fax sends or receives a document, it assigns it a unique identification number (nnnn). Status Monitor Messages The following messages are displayed on the status monitor when the machine is performing a function or encounters an error. Service Error 5100 Is Displayed Cause Movement of the Holder is blocked.

  • Page 79

    (3)Right-click the Canon XXX icon, then select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (where “n” is a number) with Canon XXX appearing in the Printer column is selected for Print to the following port(s).

  • Page 80: Specifications

    USB Port: Hi-Speed USB Specifications are subject to change without notice. Based on the Canon FAX Standard Chart No.1, Standard mode. A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

  • Page 81

    Operation can only be guaranteed on a PC with Windows Vista, XP or 2000 pre-installed. Some functions may not be available with Windows Media Center. To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon printer.

  • Page 82: Appendix

    The telephone line cable should not be reconnected or the main power switch turned ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of equipment.

  • Page 83

    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042...

  • Page 86

    For details on FINE Cartridge replacement, refer to “Replacing a FINE Cartridge” in this guide. Description PG-40 Black PG-50 Black High-Capacity (optional) Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at www.canonestore.com. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042 U.S.A.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: