Page 2
1. Safety 1.1 About Our company hopes that all drivers safely enjoy our electronic unicycle for as long as they wish! You can compare it to learning a bike- it might not be so easy at first, but it is extremely gratifying and once you learn, you’ll know for life! Before each ride, please check tire for damage or loose parts;...
Step 4: Manipulation of the drifting unicycle left and right- if you lean your left foot forward, the unicycle will turn right. If you lean your right foot forward, the unicycle will turn left. Step 5: To get off the unicycle, make sure that it is stopped and you are balanced. You must be standing completely straight in order to get off.
Page 4
3. Safety Instructions This section highlights a few safety procedures and warnings to let you have certain knowledge of security considerations. In order to ensure that you can safely drive the unicycle, please be sure to read the operation instruction handbook and comply with the relevant safety instructions.
Page 5
4. Battery Maintenance This is information on how to charge and maintain the battery. Please follow these directions if you’d like to extend the battery life to its longest potential. 4.1 Low Battery When the power indicator light is red light and flashing, you must stop driving and charge your unicycle. The unicycle will begin to skip/stop when it is running out of battery, so it is important that when it is low battery that you stop driving and begin to charge. Accidents/injuries could occur if you force the unicycle to drive while it is low battery. Do not use the battery/unicycle, if: 1. It begins emitting a smell or gets too hot. 2. Any liquid/materials leak out. DO NOT remove/replace the battery at any time; this can only be done by an experienced/designated technician. Don’t touch the battery if any liquid/materials leak out. Do not let any children or animals near the wiring or unicycle while it charges. Parental supervision is necessary. 4.2 Charging Make sure the unicycle is completely dry before charging. Open the charging cover of the unicycle. Plug the socket of the charger to the power supply (110‐220V; 50‐60Hz), make sure the green indicator light of the charger is on, and then connect the charger with the unicycle. ...