Cyron ABIG7-A6K URBAN User Manual

ABIG7/5 LED HEADLIGHT USER MANUAL
Thank you for choosing CyronMotor products! We are committed to provide
the latest lighting technology without any compromises. Please read instructions
completely before starting installation.
TOOLS NEEDED
Consult your vehicle/motorcycle user manual for process of gaining access to headlight
housing and assembly. No special tools needed for CyronMotor headlights.
Look for the installation video of this product on CyronMotor.com
and Cyron YouTube channel.
INSTRUCTIONS
ABIG integrated series LED headlights replace vehicle's entire reflector assembly which
normally includes glass reflector, bulb, mounting rings, rubber boots, etc. Follow vehicle
user manual to gain access to the headlight reflector.
Install the new light in place of the old glass reflector and secure the same method as the
vehicle's reflector was secured. Pay attention to the orientation of the light. It keyed such
that it should only fit in one position to provide secure mounting and correct light pattern.
Wire harness should be a simple plug-in for H4 sockets. 7" lights are provided with two
adapters which should be used as needed; an H13 and Harley 4-pin. H13 fits several
automotive applications. Harley adapter (Cyron# ABIGC2A) is mostly used on 2014 and
newer bikes. (Exception is Roadking 2016+ which needs Cyron ABIGC3A adapter). YOU
MAY NOT BE USING EITHER ADAPTER IF YOUR BIKE/CAR ALREADY HAS AN H4
PLUG. For bikes with dual bulb arrangements follow the wire harness and find the black
plug placed inside the fairing. Unplug and replace with the adapter provided. This adapter
is provided with a blue lead for DRL connection.
CAUTION: HOT SURFACES. DO NOT TOUCH THE
METAL SURFACES OF THE HEADLIGHT. THEY CAN BE
EXTREMELY HOT.
OPERATING IN HIGH-BEAM FOR EXTENDED PERIOD
OF TIME WHILE THE VEHICLE/BIKE IS STATIONARY
WILL CREATE EXCESSIVE HEAT AND WILL
ULTIMATELY CAUSE DAMAGE.
1