Set-Up & Operation; Unit Set-Up - FilterStream AirTamer A700 Instruction Manual

Ultra high efficiency air purifier
Table of Contents

Advertisement

Set-Up & Operation

Unit Set-Up

1.
Unpack the unit and make sure that any and all tape and protective
wrap is removed from the unit.
NOTE:
your airTamer® is shipped WiTh a cerTified airTamer®
air filTer iNsTalled iN The uNiT. please remove The air
filTer plasTic WrappiNg before firsT use.
2.
Remove the
down on the AIR EXIT GRILL TABS (2a)
and pulling the AIR EXIT GRILL away from
the unit (2b).
3.
Remove the
the sides of the AIR FILTER and pulling the
AIR FILTER out of the unit.
4.
Remove the plastic wrap protecting the filter.
5.
Mark the suggested month of
replacement on the AIR FILTER by checking
off the appropriate month (e.g. If it is
suggested that the AIR FILTER be replaced
in 12 months and you install the AIR FILTER
on January 1st, put a check in the box beside
the letter representing the month to replace
– in this case January, for the next January).
makes life better!
AIR EXIT GRILL by pushing
AIR FILTER by firmly gripping
AIR FILTER
2a
2b
3
5
Page 7

Advertisement

Table of Contents
loading

Table of Contents