Fender VICTOR BAILEY JAZZ BASS Wiring Diagram

017405
(2)
SOLDER AND SHRINK TUBE TOGETHER
BLACK WIRE FROM BATTERY SNAP (1)
AND BLUE WIRE FROM JACK ASSEMBLY
APPLY TIE WRAP TO DOUBLE BATTERY
SNAP ASSEMBLY BLACK & RED WIRE(S)
SO SNAPS CAN'T PULL BACK TO CAVITY
SOLDER BLACK WIRE FROM NECK PICKUP,
BRIDGE PICKUP AND BRIDGE GROUND
TO GROUND LUG
SOLDER BLACK WIRE FROM JACK ASSEMBLY,
GROUND ASSEMBLY AND PC-BOARD
TO GROUND LUG
21
12
SOLDER BLACK WIRE FROM
GROUND-LUG ASSY TO TERM-
INAL (1) OF PAN CONTROL
SOLDER & SHRINK TUBE WHITE
WIRE(S) FROM PC - BOARD & PAN-
CONTROL ASSEMBLY
13
25
28
23
VICTOR BAILEY JAZZ BASS
WIRE DIAGRAM
21
TO GROUND-LUG
24
3" BLACK WIRE
TO GROUND-LUG ASSY

BRIDGE ASSEMBLY

27 26
0196800
INSERT CABLE FROM DOUBLE BATTERY-SNAP
ASSEMBLY THROUGH CHANNEL TO ELECTRONIC
CAVITY
NECK PICKUP
SOLDER AND SHRINK TUBE TOGETHER
RED WIRE FROM DOUBLE BATTERY SNAP
AND RED WIRE FROM PC-BOARD
BRIDGE PICKUP
SOLDER AND SHRINK TUBE TOGETHER
YELLOW WIRE FROM NECK PICKUP &
YELLOW WIRE FROM PAN-POT
SOLDER AND SHRINK TUBE TOGETHER
WHITE WIRE FROM BRIDGE PICKUP
AND WHITE WIRE FROM PAN POT
SOLDER AND SHRINK TUBE TOGETHER
WHITE WIRE FROM PC-BOARD AND
WHITE WIRE FROM JACK ASSEMBLY
DETAIL " A "
PAN CONTROL MOUNTING
11
DETAIL"A"
14
STRIP 3/8" FROM END OF
WIRE, GROUND UNDER
BRIDGE PLATE
WHITE WIRE TO BRIDGE PICKUP
WHITE WIRE TO P.C. BOARD
YELLOW WIRE TO NECK PICKUP
Pg. 2 of 4
06-17-2002 Rev. A