Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Audiovox Rearview Mirror with 4.5" Color LCD LCMR5RP
Summary of Contents for Audiovox Rearview Mirror with 4.5" Color LCD LCMR5RP
- Page 1 Rearview Mirror with 4.5" Color LCD with Navigation and 2 Camera inputs Model: LCMR5RP Installation Manual Features: • Rearview Mirror with 4.5" LCD • Rearview Camera Input • Interior Camera Input • Navigation Input • NTSC /PAL Camera Compatible...
-
Page 2: Cautions
The product is intended to assist in safe driving and to allow the driver to have a broader rearview while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulations. -
Page 3: Table Of Contents
TABLE OF CONTENTS Cautions! Preface WARNING Packing list 1.Installation Instructions 2.Signal Inputs 3.Controls and Indicators Specifications Maintenance Troubleshooting Illustration of connections... -
Page 4: Preface
This replacement mirror /monitor can display up to 3 different video inputs. The inputs are Navigation, Rear observation camera and Interior observation camera. Not all rearview mirrors attach to the vehicle with the same style mount. Please consult the application guide for the appropriate mounting bracket for your vehicle or call Tech Service at 800-225-6074. -
Page 5: Installation Instructions
1. Installation Instructions (1) Mount the mirror/monitor Remove the original factory mirror. removing factory mirror.) Check to make sure that the factory mirror mount you remove matches the mirror mount on the replacement mirror. If it does not match, consult the application guide or call Technical Service at 800-225-6074. Slide the receiving bracket on the back of the new mirror stalk onto the windshield mounting button. -
Page 6: Signal Inputs
Electrical Connections: Connect the 4 wires in the following manner. a) Red wire - 12 volt constant (positive) b) Black wire - Chassis ground (negative) c) Blue wire - 12-volt ignition (12 volt with ignition on) d) Green wire - Reverse light switch (12 volt when vehicle is in the reverse gear) WARNING: Observe polarity when connecting the wires. - Page 7 Some operators may find that leaving the Navigation Image on the LCD monitor at all times becomes a distraction while operating their motor vehicle. For the convenience of those operators, a ‘Display Timer Slide Control Switch’ has been added to the mirror. A.
-
Page 8: Controls And Indicators
3. Controls and Indicators Figure 5 shows the function controls of the rear view mirror. A: 4.5" LCD Panel B: Rearview Mirror Glass C: “+”Button (optional Navigation System required) Incrementally increase volume level of the navigation voice command when pressed. Note: Will only operate when the Navigation System remote control is removed from the cradle. - Page 9 Note: Will only operate when the Navigation System remote control is removed from the cradle. F: “-” Button (optional Navigation System required) Incrementally decrease volume level of the navigation voice command when pressed. Note: Will only operate when the Navigation System remote control is removed from the cradle.
-
Page 10: Specifications
General Power Supply Power Consumption Current Draw Video Input Audio Input Audio Power Output Operating Temperature Range Display System Screen Brightness Contrast Ratio Backlight Life Resolution Video Format Display Format Navigation input Specifications 12VDC <12W <800mA 1Vp-p/ 75 Impedance <=1V 0.5W ×... -
Page 11: Maintenance
Though your Rearview mirror requires little care, you can still maintain its condition and performance by following the procedures below. • Keep your system away from excessive moisture, extreme heat or cold, and magnetic fields. • Keep liquids away from the display and mirror. •... -
Page 12: Troubleshooting
Symptoms The ON/OFF signal light <E> is not on after the car is started? No video signal appears while reversing the car? Video image is not sharp enough? Troubleshooting Solutions Check the installation-wiring diagram. Ensure that the parallel red and black line from the control box is connected properly. -
Page 13: Illustration Of Connections
Illustration of Connections Figure 6... - Page 14 © 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7381...