Genie Universal Series Alternate Instructions

Alternate instructions for the Teach & Pair Programming Method, for Fixed Code/Dip Switch
Programming and alternate blink rates are to be used in conjunction with the main instruction set.
Page 1: Changing Blink Rate Patterns
Page 2: Fixed Code/Dip Switch Programming
Page 3: TEACH & PAIR Programming Method
BLUE LED Blink Rate Mode 1: Factory Default Setting
(Blink Rate - Once every 3 sec)
 With only (1) AAA battery installed - hold down the TOP DOOR button while
simultaneously installing the second AAA battery. Continue to hold the TOP DOOR
button for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONS blink 3
times in unison.
BLUE LED Blink Rate Mode 2
(Faster Blink Rate - Once every 2 seconds)
 With only (1) AAA battery installed - hold down the MIDDLE DOOR button while
simultaneously installing the second AAA battery. Continue to hold the MIDDLE
DOOR button for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONS
blink 3 times in unison.
BLUE LED Blink Rate Mode 3
(Blue LED OFF -
 With only (1) AAA battery installed - hold down the BOTTOM DOOR button while
simultaneously installing the second AAA battery. Continue to hold the BOTTOM
DOOR button for a total of 10 seconds until the blue LEDs on the OTHER 2 BUTTONS
blink 3 times in unison.
Changes made to the blue LED blink rate pattern will impact battery life. For best battery life, see Blink Rate
Mode 3 to turn LEDs off completely.
ALTERNATE INSTRUCTIONS
UNIVERSAL WIRELESS WALL CONSOLE UNIVERSAL WIRELESS WALL CONSOLE UNIVERSAL WIRELESS WALL CONSOLE UNIVERSAL WIRELESS WALL CONSOLE
ALTERNATE INSTRUCTIONS
CHANGING BLINK RATE PATTERNS CHANGING BLINK RATE
CHANGING BLINK RATE CHANGING BLINK RATE
Maximum Battery Life)
PATTERNS
PATTERNS PATTERNS
Page 1