Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. R300 - Stylus Photo Color Inkjet Printer
  6. Quick reference

Epson Stylus Photo R300 Series Quick Reference

Epson stylus photo r300: quick reference
Hide thumbs Also See for Stylus Photo R300 Series:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
1
1
Unpack
Unpack
1
Remove everything from the box.
Preview Monitor
(included with EPSON
Stylus Photo R300M only)
2
Remove all the tape and
packing material from
the printer.
3
Open the output tray and lift the printer cover.
Then remove the tape.
Make sure the CD/DVD tray guide
is closed completely.
EPSON Stylus
Start
Start
Here
Here
Printer
Preview Monitor Base
(included with EPSON
Stylus Photo R300M only)
Photo R300 Series
®
Small CD
insert
Ink cartridges
CD position
check paper
CD/DVD Tray
Printer Software
CD-ROM
Make sure the
tray guide is up
CPD-17016
4044644-00
XXX
Quick Reference
User's Guide
continue

Advertisement

loading

Related Manuals for Epson Stylus Photo R300 Series

Summary of Contents for Epson Stylus Photo R300 Series

  • Page 1: Start Here

    Stylus Photo R300M only) Stylus Photo R300M only) Remove all the tape and packing material from the printer. Open the output tray and lift the printer cover. Then remove the tape. Make sure the CD/DVD tray guide is closed completely. Photo R300 Series ®...

  • Page 2: Turn On The Printer

    If you have the EPSON Stylus Photo R300M, you need to attach the preview monitor. Unscrew the cap from the end of the screw on the base. Then remove the screw. Unscrew cap Position the monitor into the base as shown, lining up the holes for the screw.

  • Page 3: Install The Ink Cartridges

    Press forward on the front left corner of the cartridge cover to lock it in place. Press the Maintenance button and close the printer cover. CAUTION: Don’t turn off the printer or interrupt charging while the light is flashing or you’ll waste ink.

  • Page 4: Load Paper

    Install Software Install Software Windows ® Make sure your printer is NOT connected to your computer, then follow the steps below. Turn on your computer. Wait for the system to start up, then insert the EPSON in your drive. NOTE: If you see a screen like this, click Cancel and disconnect the printer from your computer.
  • Page 5 Plug-In, then click Install. Follow the on-screen instructions. When installation is complete, click Back. To add a link to EPSON PhotoCenter, click EPSON PhotoCenter Link, then click Add. Click Back, then click Back again. From the Install Menu, click Install Printer Manual to install your on-screen Reference Guide.
  • Page 6 You see the Printer List window. If the Stylus Photo R300 appears in the printer list, go to step 2. If you don’t see it, make sure your printer is turned on and connected. Then click Add or Add Printer, and select EPSON USB at the top of the screen and Stylus Photo R300 below.

This manual is also suitable for:

Stylus photo r300m