Maintaining Your Printer; Checking The Print Head Nozzles - Epson Stylus NX215 Quick Manual

Maintaining Your Printer

Follow the instructions in this chapter for checking and cleaning the print head
nozzles and replacing ink cartridges. To align the print head, if necessary, see your
on-screen Epson Information Center.
Caution:
To keep your printer looking like new, don't place anything on top of the cover or use it
as a writing surface. If you need to clean the cover, use only a soft, non-abrasive
microfiber-type cloth.

Checking the Print Head Nozzles

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles.
1. Load letter- or A4-size paper in the sheet feeder (see page 5).
2. Press the
3. Press l or r to select
4. Check the nozzle check pattern that prints to see if there are gaps in the lines.
5. If there are no gaps, press
If there are gaps or the pattern is faint, press x
(see page 29).
28
Maintaining Your Printer
and
Index Sheet
Nozzle Check
Nozzles are clean
y
buttons at the same time.
Scan
, then press x
Nozzles need cleaning
Stop/Clear Settings
.
Start
to finish.
to clean the print head
Start