Making A Quick Copy - Epson Stylus CX5000 Series Quick Manual

Making 10 or More Copies
1. Make sure the Epson Stylus CX5000 Series all-in-one is turned on.
2. Place the photo on the glass as described on page 7. Be sure to close the
document cover.
3. Press the
Copies
the CX5000 Series to print up to 100 copies.
4. Load enough paper for the number of copies (up to 100) you want to make.
For example, to print 12 copies, load 12 sheets of paper.
5. Press the paper type button to select
6. Press the paper size button to select
7. Press the x
Start Color
The CX5000 Series makes copies until it runs out of paper. Then the red
light comes on.
Error
b
8. To make more copies, load more paper and press the x
resume.
If you don't need any more copies, press the y
Note:
When making a lot of copies, it is a good idea to remove the printed copies from the
output tray after every 10 sheets or so.

Making a Quick Copy

If you want to make a copy quickly and do not need high quality, you can print a
"draft" copy. The print quality is reduced, but the copy is printed faster.
1. Load plain, letter-size paper and select
control panel.
2. When you are ready to copy, press and hold down the y
press the x
Start Color
button (to copy in black and white). When the
both buttons.
button until you see "
or x
Start B&W
button (to copy in color) or the x
–
" in the
Copies
or
Plain Paper Photo Paper
, , or
Letter 4"x6" 5"x7"
button.
button.
Stop
and
Plain Paper
light starts flashing, release
On
window. This tells
.
.
button to
Start Color
size on the
Letter
button, then
Stop
Start B&W
Copying
11