Envision H22W Operation Instructions Manual

Envision H22W Operation Instructions Manual

High-resolution multi-scan color monitor
Hide thumbs Also See for H22W:

Advertisement

Operation Instructions

Thank you for purchasing this monitor, a high-resolution multi-scan color
monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide proper protection against harmful interference to
a residential installation. This monitor generates, uses, and can radiate
radio frequency energy. Harmful interference to radio communication may
be led as a result if it's not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If
this monitor does cause serious interference to radio or television reception,
resetting the monitor may determine it. Moreover, users are encouraged to
correct interference by doing one or more of the following:
 Reorient or relocate the receiving antenna.
 Move the monitor and the receiver further away from each other.
 Connect the monitor into an outlet on a circuit different from that to
which the receiver is connected.
 Consult your local dealer or an qualified technician
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power
supply cord and the provided shielded video interface cable with bonded
ferrite cores. Also, any unauthorized changes or modifications to this monitor
would void the user's authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be
used to meet the emission level limits.
.

Advertisement

Table of Contents
loading

Summary of Contents for Envision H22W

  • Page 1: Operation Instructions

     Reorient or relocate the receiving antenna.  Move the monitor and the receiver further away from each other.  Connect the monitor into an outlet on a circuit different from that to which the receiver is connected.  Consult your local dealer or an qualified technician...
  • Page 2: Table Of Contents

    Content Safety Precautions ...1 First Setup ...2 Quick Installation ...2-5 Front View of the Product ...6 Rear View of the Product ...6 Using On Screen Display (OSD) Functions...7-9 Supporting Timing Modes ...10 Technical Information... 11 Care and Maintenance ...12 Troubleshooting ...12...
  • Page 3: Safety Precautions

    This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.
  • Page 4: First Setup

    First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories :  Power cable  D-Sub cable  User’s guide  Warranty Documents Quick Installation Installing & Removing the Base Install Remove...
  • Page 5 Preparing To Install The Optional Wall Mount Arm (Not Included) This monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then dis-connect the cables from the monitor before performing the procedure below. Lay the monitor face down on a soft surface.
  • Page 6 3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instrucstions on attaching it to the wall. NOTE The ENVISION H22W is in compliance with the most current revision of the VESA 100mm Flat Panel Monitor Physical Mounting Interface (FPMPMI standard).
  • Page 7: Connecting The Monitor

    Connecting the Monitor 1. Connect power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 2. Connect Analog video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor.
  • Page 8: Front View Of The Product

    Front View of the Product ➊ OSD TURN ON/OFF ➋ SCROLL DOWN/DECREASE ➌ SCROLL UP/INCREASE Rear View of the Product ➐ ➐ POWER INPUT ➑ VGA INPUT ➊ ➋ ➌ ➍ ➎ ➏ ➍ CONFIRM SELECTION ➎ POWER ON/OFF ➏ LED INDICATOR ➑...
  • Page 9: Using On Screen Display (Osd) Functions

    Using On Screen Display (OSD) Functions Display main menu. Exit from OSD menu. Auto adjust the image when not in OSD menu. Confirm the selection. Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ ▲or ▼...
  • Page 10: Osd Functions

    OSD Functions Auto Image Adjust : Auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Available in Analog mode only. Contrast : Adjust the foreground white level of screen image. ▲ : increase contrast, Brightness : Adjust the luminance of the video.
  • Page 11 Setup Menu : Set up Language Select, Resolution Notice, OSD Position, OSD Time Out and OSD Background. Setup Menu >Language Select : languages. Setup Menu >Resolution Notice : to set the resolution to 1680x1050 for best image quality when the resolution setting is not at 1680 x 1050.
  • Page 12: Supporting Timing Modes

    VESA VESA Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor. 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz...
  • Page 13: Technical Information

    Technical Information Technical Specification LCD Panel 22” (548mm Viewable Image Size) TFT Widescreen LCD Energy Star compliant VESA Power Management DPMS compatible < 1 W Displayable Resolution WSXGA 1680 x 1050 max. Vertical Frequency 60Hz max. LCD Display Color 16.7M Tilt 0°~20°...
  • Page 14: Care And Maintenance

     Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies.  Never try to repair your monitor yourself. Always call your service center or a qualified technician to fix it.

Table of Contents