Cadillac 2011 CTS Coupe Owner's Manual page 193

For example, if there are
two keyless access transmitters in
the vehicle and one is removed, the
other will be locked in. The keyless
access transmitter locked in the
vehicle can still be used to start
the vehicle or unlock the doors,
if needed. A person approaching
the outside of the locked vehicle
without an authorized keyless
access transmitter, however, will
not be able to open the door, even
with a transmitter in the vehicle.
See the Keyless Access information
for
or
for more
information.
You may temporarily disable
the keyless locking feature by
pressing the door unlock switch for
three seconds on an open door. To
enable keyless locking, transition
the power mode from off.
To select whether the horn sounds
or the lights flash when the vehicle
is locked, see Remote Door Lock
earlier in this section.
Press the customization button until
Keyless Locking appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Off (default): The keyless locking
feature will be disabled.
On: The keyless locking feature will
be enabled.
The doors will automatically lock
several seconds after you turn
the ignition off, remove a keyless
access transmitter from the interior
of the vehicle, and close all of the
doors.
No Change: No change will be
made to this feature. The current
setting will remain.
Instruments and Controls
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.
Keyless Unlock
If the vehicle has the keyless
access system, this feature allows
you to select which doors will
automatically unlock when you
approach the vehicle with the
keyless access transmitter and
open the driver door. See the
Keyless Access information for
or
information.
To select whether the lights flash
when the vehicle is unlocked, see
Remote Door Unlock earlier in this
section.
5-51
for more