Download Print this page
Encore ENH908-NWY Features

Encore ENH908-NWY Features

8 port switch

Advertisement

Quick Links

ENH908-NWY

8 Port Switch

ENCORE EN908-NWY is a powerful, high-performance, Fast Ethernet switching hub with
all ports capable of 10Mbps or 100Mbps auto-negotiation operations (NWAY) which means
the ENH908-NWY automatically negotiates with the connected partners on the network
speed and duplex mode. It is ideal for micro-segmenting large networks into smaller
connected subnets for improved performance, enabling the bandwidth demanding
multimedia and other imaging applications.
Moreover, the 10/100Mbps auto-sensing ability provides an easy way migrating 10Mbps to
100Mbps LAN with no hassle compare to the shared 10Mbps or 100Mbps LAN. The
ENH908-NWY switching hub delivers a dedicated 10/100Mbps connection to every
attached client with no bandwidth congestion issue.
The ENH908-NWY also supports auto MDI/MDI-X crossover cable function. This means
that all ports can be used to connect another switch or hub using a straight-through or a
cross-over RJ-45 UTP cable. Store-and-forward switching mode promises a low latency
plus eliminates all the network errors, including Run and CRC error packets. ENH908NWY
is a pure plug-n-play device, no software to install and configure and full compliance with all
kinds of network protocols.

Advertisement

loading

Summary of Contents for Encore ENH908-NWY

  • Page 1: Port Switch

    ENCORE EN908-NWY is a powerful, high-performance, Fast Ethernet switching hub with all ports capable of 10Mbps or 100Mbps auto-negotiation operations (NWAY) which means the ENH908-NWY automatically negotiates with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller connected subnets for improved performance, enabling the bandwidth demanding multimedia and other imaging applications.
  • Page 2 Features: • Complies with 10BASE-T specifications of the IEEE802.3 standard • Complies with 100BASE-TX specifications of the IEEE802.3u standard • All ports are RJ-45 type for the 100Base-TX and 10Base-T connections • Supports NWAY protocol for speed (auto sensing 10/100Mbps), and duplex mode Half or Full auto-detection on all ports •...

This manual is also suitable for:

Enh908-nwyv3